EDI module RO system pure water treatment plant
USD $3,000 - $6,000 /Set
Min.Order:1 Set
Dongguan Vliya Water Treatment Equipment Co., Ltd.
EDI (Electrodeionization) is a revolutionary water treatment technology; it is a membrane filtration and desalination technology that skillfully combined the electrodialysis technology and ion exchange technology together, which is high-tech, green and eco-friendly technology.
EDI uses the standard modules in design and can be assembled into arbitrary system according to the requirement ,water output can be up to 0.5-60M3/H
EDI equipment uses the RO outlet water as feed water. The resistivity of RO outlet water is normally 40-2μS/cm (25℃), and the resistivity of EDI outlet water can normally reach 18MΩ.cm (25℃). According to the application of deionization water and the setup of the system, EDI outlet water can meet the requirements for resistivity of 1-18.2MΩ.cm (25℃).
RO water purifier system is raw water through precision filter, granular activated carbon filters, activated carbon filters, compression, and then through the pump pressure, the use of reverse osmosis membrane pore size 1/10000μm make a higher concentration of water into low concentration of water, while the industrial pollutants, heavy metals,bacteria, viruses and other impurities in the water mixed with a large number of full isolation, to achieve the required physical and chemical indicators for drinking and hygiene standards, outputs to clean pure water is the best choice of body replenish water quality. It is key equipment of pure water plant.
• Providing USP (United States Pharmacopeia) grade water |
• Purified water |
• Feed to WFI (Water For Injection) stills |
• Steam Generation / Boiler Feed |
• Microelectronics / Semiconductor makeup and rinse water |
• For high quality makeup demineralized water |
• General industry |
• Surface finishing |
• Chemical manufacturing |
• Hospital & university central systems |
The above machine which we supply it to you, we can give you one years after sales warranty, we can also send our engineer to you factory to install this equipment and train your staff, but the Buyer should pay the round air ticket cost and arrange the hotel accommodation as well as the means for Seller’s engineer. We will send some free set of spare parts for you change it.