Higher Finishing Surface SPCC
Negotiable /Ton
Min.Order:25 Tons
Tianjin SWKD Metal Materials Co., Ltd.
Cold Rolled Low Carbon Steel Strip For Enamel
Cold rolled low carbon steel strip for enamel are of low carbon and mainly used for inner container of storage water heater. It can also be used for decorative wall panels of subway station, interior and exterior wall, decorative wall panels of tunnel, wall panels of sterile operating room, wall panels of underpass, heat exchanger elements of air pre-heater in heat-engine plant.
Grades and standards
GB/T13790: DC01EK, DC03EK, DC05EK
Technical supply conditions
Product specification:
Thickness:0.30-1.80mm
Width:750-1300mm
Delivery state: Cold-rolled steel coil
Mechanical property
Usage | Grade | Yield Strength(re/mpa) | Tensile Strength(re/mpa) | Elongation (%) | 180degree Bending test |
| |||||
h<0.4 | 0.4≤h<0.60 | 0.6≤h<1.0 | 1.0≤h<1.6 | 1.6≤h<2.0 | b≥20mm | ||||||
Ordinary use | DC01EK | ≤280 | ≥270 | ≥30 | ≥32 | ≥34 | ≥36 | ≥37 | D=0a | ||
Stamping use | DC03EK | ≤240 | ≥270 | ≥34 | ≥36 | ≥38 | ≥39 | ≥40 | D=0a | ||
Deep draw | DC05EK
| ≤200 | ≥270 | ≥38 | ≥40 | ≥42 | ≥44 | ≥45 | D=0a |
Our products:
If you are interests in our products, please contact us directly, our reply will be sent to you at first time!