1. Description of Salt water purifier salt water treatment plant

With all kinds of beforehand filters, it can get rid of the unhealthy substances such as sand, grits, suspended substances, bacteria, virus, pesticide residue, heavy metallic ions, and also can get rid of the carcinogenic substances such as chloroform, fluorine.
It can be used as water treatment apparatus in the field of food, drink, chemical, pharmacy, semiconductor, electronics and so on.
Inlet water quality: conform to the hygienic standard of potable water (GB5749-2006) and conductivity :400us/cm
Outlet water quality: conform to the hygienic standard of potable water (GB17324-2005) content of chlorine residue in raw water :0.1mg/l

Full automatic with qualified components, FRP or SS pre filter tank, ultra filtration membrane auto, manual flush, manual wash by chemical agents, auto stop running under the condition of high water level (or high pressure), auto start running under the condition of low water level(or low pressure), multi stage pump is protected when no power supply, poor power, exceed large electrical current, short circuit or creepage

Salt water purifier salt water treatment plant

Product Flow Chart

2.Flow chart of Salt water purifier salt water treatment plant

NOS.	Items	Information
1. Pre-treatment	Sea water tank	Store sea water, let it have a sedimentation before entering the plant.
	Feed water pump	Provide power for pretreatment part.
	Dosing system	And add the flocculant.
	Quartz sand	quartz sand, used to remove iron,colloid,silt etc, to make effluent water cleaning.
	Active carbon filter	Remove color, free chloride, organic matter, harmful matter, etc.
Dosing system	Detail dosing system will be decided by: source quality & treated water quality requirements.Normal including: inhibitor dosing, PH dosing, reducing dosing, germicide dosing.
2. RO sea water plug system	Security filter	Prevent large particles, iron, dust, SS matter, impurity into the RO membrane.
	Plung pump	Provide power for RO.
	RO membrane	Removes: lead, cooper, barium, chromium, mercury,

3. Control system	Control panel	Assembled by factory. Auto type.
	PLC mode	Adopt Mitsubishi from Japan, good quality.
	Touch screen	Make use of WeiNview from Taiwang. Convenience for user to operate.
	Electricity components	Some famous brands from German.
	Plant skid	Anti corrosion paited.

Product Feature

3.Feature of Salt water purifier salt water treatment plant

a) Overall system runs automatically controlled by PLC
b) Protection system, plant turns off if it encounters a fault
c) Energy saving and low noise, no need to heat
d) Stable running, high desalination and recovery rate with no pollution
e) Pretreatment equipment smaller than similar products & compact structure, saves installation place,
f) Wash RO membrane automatically when system turn off
g) Dependable performance and long life time technicalsupport.
h) Highly efficient and low carbon emissions
i) Applicable to more wider conditions, (-10 °C ~ 50 °C can stabilize the work)
j) Design user-friendly, thoughtful, exclusively for the sake of the customer's use