4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm tempered glass / toughened glass with PVB for tempered laminated glass with CE and CCC
USD $3.5 - $25 /Square Meter
Min.Order:300 Square Meters
Qingdao Glorious Future Energy-Saving Glass Co., Ltd.
Glorious Future Glass Group have 2 Production base, Qingdao factory and Beijing factory.
Qingdao factory mainly focus on normal-thick glass deep processing, The glass product including the following:
Beijing factory mainly focus on Ultra-long and Ultra-thick glass deep processing, It including the following product:
Toughened glass is also called tempered glass,Tempered glass is a type of glass with evenly distributed compressive stresses on the surface which is made by heating float glass to nearly softening point and then cooling it down rapidly by air. During the instant cooling process, the glass exterior is solidified due to rapid cooling while the interior of glass is cooled down relatively slowly. This process will improve the glass exterior compressive stress and interior tensile stress resistance which can improve the overall mechanical strength of glass by gemination and result in good thermal stability.
As a glass industry operators,If you are also interested in the laminated glass, and also want to learn about the laminated glass,Please Click the below image, there is the more detailed information in it.
If you are also interested in the insulated glass, and also want to learn about the insulated glass,Please Click the below image, there is the more detailed information in it.
The following Glass could be tempered processing:
Float glass,Glaverbel glass,On-line coated glass,On line Hard- Low-E,Off line Soft-Low-E, On-line SUN-E and so on.
Color: clear,royal blue,ford blue,ocean blue,F-green,green, dark grey,light grey,red bronze,golden bronze and so on.
1.Cutting : cutting the annealing glass to the actual needs of shape.
2.Glass edging: Edging machine to mill the four edges to prevent frund when steeling,while maintaining the beautiful appearance.
3.Drilling hole:If need to drilling hole using drilling machine.
4.Washing dry:cleaning the glass with washing maching.
5. Tempered glass:Tempered glass is produced by heating annealed glass in a furnace to 700°,then the glass is rapidly cooled with jets of cold air to 40°,
through the procedures, the original glass is formed of tempered glass.
1.Safety
Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
2.High mechenical-resistant strength
The mechanical strength of tempered glass is as 3-5 times powerful as normal annealing glass, bending strength is as 2-5 times powerful as normal flat glass.
3.Thermal stability
The excursion of temperature that tempered glass endure is 250-320 degree.
4.Can not be cut down
Once tempered, can not be cut down or drilling hole.