On-load Tap Changer Oil Recycling Machine Oil Deacidify
USD $1,000 - $2,000 /Set
Min.Order:1 Set
Chongqing Yuneng Oil-Filter Manufacturing Co., Ltd.
Dielectric Oil Treatment Cleaning System For Circuit Breaker/Switch/Capacitor Oi
On-line On-load Tap Changer Oil Treatment Machine Oil Regeneration
Switching Device Oil Recycling Machine Switching Device Oil Regeneration
Onload tap changer Online Oil Treatment Machine Oil Filtration Oil Purifier Oil Purification Machine
On-load Tap Changer Oil Recycling Machine Oil Deacidify
Technical Parameters
Type JZ-0.6KY
capacity 10L/min (600L/h)
oil temperature -25°C ~70°C
working power 50Hz 380V 3 phase
total power 0.25 KW
inlet/outlet oil pipe 16/16 mm
size 70×30×120 cm
working noise≤78 dB(A)
weight 50Kg
working condition individual and continuous on line running.
After-treated oil Condition
Water content≤20PPm
Suspended particles ≤1~3μm
cleanness(NAS1638) ≤6 Grade
Function
Integrate the function of fineness filtration and dehydration..
it can effciently remove dissolved water, and control the water content,flash point and dielectrical strength.
it can efficiently remove particles in the oil, so that control the oil cleanness up to Nas6
Machine features:
High filtration efficiency,simple to opera te, no-man supervision.
All the pipes use stainless steel,no secondary pollution happens during the filtration process.
Particles filtration systerm, large filtration areas and high filtration efficiency,equiped with filtation protection device to realise automatic alrming when the overpressure happens.
Advanced filter adsorption technology,without heater.The adsorption filter is madeby special material, with low energy consumption.
Less driving components,only oil pump is used in filtration process,low energy consumption, reliable.
Use special-purposed oil pump, no leakage, low running noise and long use-span.
The whole machine is controlled automatically.
Detail Specification
Item | Name of Parameter | Type Unit | JZ-0.6BF | |
Technical parameter of the equipment | Nominal flow capacity | L/min | 10 | |
Working pressure | Mpa | ≤0.5 | ||
Working temperature og oil | °C | 20~40 | ||
Working power |
| 3-Phase 4-wire(380V-50HZ) | ||
Total electric power | KW | 0.3 | ||
Diameter of inlet-outlet hose | DN | 15/15 | ||
Out Size | Length | cm | 75 | |
Width | cm | 36 | ||
Height | cm | 110 | ||
Weight | Kg | 50 | ||
Oil Treatment Index | Filtering accuracy | um | 1 | |
Cleanness | NAS Grade | ≤6 |
Packing and Delivery
After-sales Service
1. The warranty period is 12 months.
2. We supply repairing parts for product's life time long and technical instruction.( free within the warranty period and charge beyond warranty period).
3.All our products have been run well and have been adjusted to good state before go to market. Operator only need to do as the instruction manual by pulling the buttons and add right amount of additives. If some parts broken, operator just need to remove bolts and change new. Please note: the operation and repair is very simple.
4. When the machine send to your company . You can arrange your engineer to our company to learn operate the machine . We will arrange our engineer to teach your company engineer to operate the whole machine . You only need to pay your engineer to China the air tickets fee , hotel fee and food , It is ok !
5. We also can arrange our engineer to your country . You need to pay the air tickets fee , hotel fee ,food .