Original Aruba Access Points and Accessories IAP-214-US    

Aruba Instant IAP-214 Wireless Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors - Restricted regulatory domain: United States

Aruba Instant IAP-214 Wireless Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors - Restricted regulatory domain: Rest of World

Aruba Instant 175P Wireless Outdoor Access Point, 802.11abgn, dual-band, dual radio, POE powered. Restricted Regulatory Domain - JP

Aruba Instant 175P Wireless Outdoor Access Point, 802.11abgn, dual-band, dual radio, POE powered. Restricted Regulatory Domain - IL

Aruba Instant 175P Wireless Outdoor Access Point, 802.11abgn, dual-band, dual radio, POE powered. Unrestricted Regulatory Domain. These products should be considered as ‘Rest of World’ products and MUST NOT be used for deployments in the United States, Japan or Israel

High-performance 802.11n access points provide maximum wireless LAN coverage while minimizing RF interference from LTE cellular networks.

These high-performance 802.11n APs deliver wireless data rates up to 450 Mbps per radio and employ three spatial streams to support 50% more throughput and mobile devices than previous-generation APs.

The AP-115 and IAP-115 APs feature a 2.4-GHz and a 5-GHz radio, each with 3×3:3 MIMO and three integrated omni-directional downtilt antennas. The AP-114 and IAP-114 models feature the same radios with three combined and diplexed external antenna connectors.

Aruba 134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, antenna connectors, FIPS/TAA

Aruba 135 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, integrated antennas, FIPS/TAA

AP-175P, 802.11n dual 2x2 320mW; POE

AP-175P, 802.11n dual 2x2 320mW, POE, FIPS/TAA

AP-175AC Outdoor Access Point, 802.11n 2x2 dual radio 320mW; AC powered (with PSE)

Benifits

Advanced Cellular Coexistence (ACC)

The 110 series Advanced Cellular Coexistence (ACC) feature enables Aruba WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small-cell/femtocell equipment.

Wi-Fi client optimization

To eliminate sticky client behavior while users roam, the 110 series features patented ClientMatch™ technology, which continuously gathers session performance metrics from mobile devices.

If a mobile device moves out of range of an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.

Quality of service for Lync

The 110 series APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

Best-in-class RF management

The 110 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

Specifications

• AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 3×3:3
• Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
• 3×3 MIMO with three spatial streams and up to 450 Mbps wireless data rate
• Supported frequency bands (country-specific restrictions apply):
  • 2.4000 to 2.4835 GHz
  • 5.150 to 5.250 GHz
  • 5.250 to 5.350 GHz
  • 5.470 to 5.725 GHz
  • 5.725 to 5.850 GHz
• Available channels: Dependent on configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
• Supported radio technologies:
  • 802.11b: Direct-sequence spread-spectrum (DSSS)
  • 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
• Supported modulation types:
  • 802.11b: BPSK, QPSK, CCK
  • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
• 2.4-GHz band: +28 dBm (23 dBm per chain)
• 5-GHz band: +25 dBm (20 dBm per chain)

Supported data rates (Mbps):

• 802.11b: 1, 2, 5.5, 11
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
• 802.11n: 6.5 to 450 (MCS0 to MCS23)

Power

• Maximum power consumption: 13 watts, plus up to 2.5 watts for attached USB device.
• Power sources sold separately
• Direct DC source: 12 Vdc nominal, +/- 5%
• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source
• USB host port is disabled when using an 802.3af PoE power source; for unrestricted operation with PoE power, use an 802.3at compliant source

Atennas

• AP-114: Three RP-SMA connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4-GHz and 2.5 dB in 5-GHz.
• AP-115: Six integrated down-tilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 4.5 dBi in 2.4-GHz and 5.5 dBi in 5-GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-115.
• Aruba AP-114 Wireless Access Point, 802.11a/b/g/n, 3x3:3, dual radio, antenna connectors, FIPS/TAA
• Aruba 134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, antenna connectors, FIPS/TAA
• Aruba 135 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, integrated antennas, FIPS/TAA
• AP-175P, 802.11n dual 2x2 320mW, POE, FIPS/TAA
• AP-175AC Outdoor Access Point, 802.11n 2x2 dual radio 320mW; AC powered (with PSE)

Warranty

Limited Lifetime Warranty.