Point Maximize Performance in High-Density Wi-Fi Environments Aruba Access130 Series IAP-135 

OverView

High-performance 802.11n wireless coverage for high densities of devices and MACSec security to ensure strong threat protection on the wired Ethernet uplink.

These ultra-high-performance 802.11n APs deliver wireless data rates up to 450 Mbps per radio and employ three spatial streams to support 50% more throughput and mobile devices than previous-generation APs.

The AP-135 and IAP-135 APs feature a 2.4-GHz and 5-GHz radio, each with 3×3 MIMO and three integrated omni-directional downtilt antennas. The AP-134 and IAP-134 models feature the same radios with three (combined, diplexed) external antenna connectors.  

Benifits

Wi-Fi Client Optimization

To eliminate sticky client behavior, every Aruba AP comes with ClientMatch™ technology, which continuously gathers session performance metrics and utilizes this data to steer mobile devices to the best AP and radio on the WLAN, even while users roam.

Quality of Service for Lync

The 130 series APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

Best-in-class RF Management

All Aruba APs include Adaptive Radio Management™ technology, which is essential to creating the most reliable, high-performance WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.

The 130 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

Specifications

• AP type: Dual-radio, dual-band 802.11n indoor
• Software-configurable dual radio supports 2.4 GHz and 5 GHz
• 3×3 MIMO 802.11n with three spatial streams and up to 450 Mbps per radio
• Supported frequency bands (country-specific restrictions apply):
  • 2.400 to 2.4835 GHz
  • 5.150 to 5.250 GHz
  • 5.250 to 5.350 GHz
  • 5.470 to 5.725 GHz
  • 5.725 to 5.850 GHz
• Available channels: Dependent upon configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
• Supported radio technologies:
• 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
• 802.11n: 3×3 MIMO with three spatial streams

Power

• 48 volts DC 802.3af power over Ethernet (PoE) or 802.3at PoE+
  • Note: when using 802.3af POE, the second Ethernet port is disabled. It is enabled when using an 802.3at POE power source (or direct DC power).
• 12 volts DC external AC supplied power (adapter sold separately)
• Maximum power consumption: 12.5 watts

Atennas

• AP-134 and IAP-134: Three RP-SMA connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4 GHz and 3.0 dB in 5 GHz.
• AP-135 and IAP-135: Six integrated downtilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz

Warranty

Limited Lifetime Warranty.