Extending Gigabit Wi-Fi to Outdoor Environments Access Point

270 Series  Aruba AP-275

OverView

Innovative and aesthetically-designed 270 series outdoor wireless access points (APs) deliver gigabit Wi-Fi performance to 802.11ac mobile devices under any weather conditions. The 270 series also enables 802.11n clients to operate up to three-times faster at the same distance from the AP.

Purpose-built to survive in the harshest outdoor environments, 270 series APs withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial-strength surge protection.

Benifits

• ELIMINATES INSTALLATION COMPLEXITY

  • Installation skillset requirements simplified to that of video camera complexity.
  • Connections sealed to deliver IP66- and IP67-rated protection from the elements.

• RELIABLE AND PREDICTABLE WI-FI PERFORMANCE

  • Patented ClientMatch^™ technology that ensures that roaming clients associated with the best AP to maximize performance.
  • Advanced Cellular Coexistence (ACC) minimizes interference from 3G/4G LTE equipment.
  • AppRF^™ technology identifies and prioritizes applications on the network.

• INCONSPICUOUS DESIGN IMPROVES AESTHETICS

• Device looks similar to common outdoor devices such as video cameras and light fixtures.

Specifications

• AP type: Outdoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n
  • In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate to deliver up to 600 Mbps.
• 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate
• Supported frequency bands (country-specific restrictions apply):
  • 2.4000 GHz to 2.4835 GHz
  • 5.150 GHz to 5.250 GHz
  • 5.250 GHz to 5.350 GHz
  • 5.470 GHz to 5.725 GHz
  • 5.725 GHz to 5.875 GHz
• Available channels: Dependent upon configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
• Supported radio technologies:
  • 802.11b: Direct-sequence spread-spectrum (DSSS)
  • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • 802.11n/ac: 3×3 MIMO with up to three spatial streams
• Supported modulation types:
  • 802.11b: BPSK, QPSK, CCK
  • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (with TurboQAM clients)
  • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum (aggregate, conducted total) transmit power (limited) by local regulatory requirements):
• 2.4-GHz band: +28 dBm (23 dBm per chain)
• 5-GHz bands: +28 dBm (23 dBm per chain)

Atennas

• AP-274: Six N-type female connectors for external antennas.
• AP-275: Six integrated omni-directional antennas for 3×3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of AP-275.

Warranty

Limited Lifetime Warranty.

Certifications

• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi Alliance certified 802.11a/b/g/n/ac