1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

Specifications

Multi pulse and Scanner work mode
Max power:15W
Pulse width:0.1-10ms
Spot size Graph

CO2 Scanner Laser Machine

 

1. Principle of treatment

Fractional laser technology is a kind minimal invasive treatment between invasive and noninvasive,which is the latest and hottes skin care technology in USA, and it’s also the most often talked about by dermatology community for these two years in the world. It was first published in 2004 by laser medical expert of Harvard university,Dr. Rox Anderson, who based on the fractional photothermolysis theory.Then it is immediately recognized by experts all over the world and rapidly applied to clinical treatment. fractional photothermolysis theory is an extension of traditional selective Photothermolysis theory. It combines the advantages of invasive treatment and noninvasive treatment, so it is a kind of rapid treatment with prominent effects, little side effects and shorter period of recovery. Fractional laser treatment is by the means of punching every tiny holes in the skin by using laser, then arouse a series of biochemical reactions of skin to achieve skin tighting, skin rejuvention and pigmentation removal. Fractional laser treatment will only cover part of skin tissues, and the newsmall holesare not overlapped mutually, so part of normal skin will be retained and speed up to recover. Patient can return to normal life after 4-5 days. 

 

2. Appilcation

 1.Skin resurfacing(wrinkle removal)

 2.Acne and acne scars

 3.Pigmentation(age spot, sun spot, melasma)

 4.Roughness(texture)

 

3. Advantage

 1. Fast

 2. Comfortable

 3. Variable density and denth

 4. One or two treatment

 5. Single pass

 6. No consumable costs

 

4. Technical Specification

Features:

1. Reduced thermal damage to surrounding tissues

2. Rapid healing and minimal downtime

3. Stimulate deeper collagen with high pulse energy

4. LCD display panel provides easy operation with the latest microprocessor technology

5. Adjustable scanning patterns and size

6. Adjustable intensity of pilot beam from zero to maximum

7. Adjustable pulse duration

8. Last treatment setting memorization

9. Automatic alarm system for operation and troubles

10. Covers all functions of conventional system

11. No consumable costs  

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

Model	PC030-B(Ultra Pulse)
Wavelength	10600nm
Mode Structure	TEM00
Max Power	15W
Peak Ppwer	800W
Laser Output Modes	Continuous, Single Pulse,Ultra Pulse
Aiming Beam	5mW Diode
Controls	Touch Screen
Display	Color LCD
Cooling	Water Closed Cycle Cooling System
Beam Delivery	7Joints Articulates Arm
Electrical	230V 50Hz
Warranty	1 year

 

5. Easy to Operate:

The scanner could be applicable in laser surgery, the doctor who operating with the scanner is not needed to have a complicate training course for operating steps. Instead, the doctor only need to select the figure of treatment, then easy to set up the most basic parameter and to do the treatment. The operation of scanner will be easy and humanized, so that the doctor could serve for each patient more intently.

 

6. The Scanner Technical Specification:

Spot Size	≤0.2mm Min 0.1mm at the focus
Interval Between 2 Spots	100us-10ms(adjustable)
Pulse Repetition	1-1000Hz
Treatment size	20x20mm
Net Weight	0.7kg/1.5kg(adjustable)
Size	60x60x40mm

Any requirement, pls feel free to let us know!

Amanda Zhang

 

 

 

 

 

 

Brief Introduction

 

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

 

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.