5 gallon bottle cap(two pieces), buy Non-spill 5 gallon bottle cap/bottle lid/bottle closure on China Suppliers Mobile

Product Details

Appearance conforms with these requirments:

item	Non-spill 5 gallon bottle cap/bottle lid/bottle closure
product surface	product should be full,competely structure, surface and inside is smooth, without apparent shrinkage, bubble, flash and defect
color	color equably
pollution	no dust, no plastic scrap or other impurities, no obvious odor
trademark	logo mod e& number are full, legible

Singel stick labels quality subjects to the follwing requirements:

item	Non-spill 5 gallon bottle cap/bottle lid/bottle closure
printing	single stick label should have right pattern,colors and fonts, good printing quality no obvious show besmirch,no noise and no defects.
Seal cutting	After cutting ,the single stick labels edge is smooth, no flash and silk glue. After cutting, geometry center is on the center and the deviation error less than 2mm.The label on the center of 5 Gallon caps. The deviation between label and caps center diameter error is not more than 2mm
Heat sealing	heat sealing evenly, level off, without apparent ruffle, become warped edge, Stick label and 5 Gallon caps heat sealing are strength.when taking off label,the label area remains on the cap no more than 50mm2 and not more than three areas, the largest area does not exceed 300mm2.
Thermal stability	A, resistance to low temperature,the label not appear warped edge,roll edge and loose. B. resistance to high-temperature,the label not appear warped edge,roll edge and loose.

The degree of tightness between 5 Gallon cap and inner cap is coordinate mooderately,when normal using,the inner cap can easily push out and can unrip by hand..

Carton size:500*380*370mm/500pcs

197000pcs/1*20'GP container,470000pcs/1*40'HQ container