Item	Value	Remarks
Firmware	iBeacon	Version 2.0.1
Battery model	CR2450	Coin battery, 3.0Vdc, 1 pc
Operation Frequency	2400-2483.5MHz	Programmable
Frequency Error	+/- 20KHz
Modulation	Q-QPSK
Standby current	100uA	Depends on duty cycle/broadcasting frequency
Broadcasting Frequency	900mS	Duty cycle
Output Power	0 dBm	Default setting, programmable
Receiving Sensitivity	-93dBm	High gain mode
Transmission distance	25 meters	BER<0.1%, Open space
Antenna	50ohm	On board/ PCB Antenna
Size	31mm31mm9mm	case size:39mm39mm15mm
Operation Voltage	2.0-3.6V	DC

Default setting:

Default iBeacons UUID(The sample from Apple's AirLocate): E2C56DB5-DFFB-48D2-B060-D0F5A71096E0

Major and minor identifier: 1, 1

Pairing password: AprilBrother

How to modify iBeacon parameters :

you could modify the parameters (bulk) by the APP named with Aprilbeacon directly.

you could search Aprilbeacon from App store or googleplay.

Parameters: UUID/Major/Minor/output power/broadcasting frequency .

Aprilbeacon is the first company in the world to enable this function.

Characteristic:

FFF0->FFF1 - read/write UUID

FFF0->FFF2 - read/write major identifier

FFF0->FFF3 - read/write minor identifier

FFF0->FFF4 - read/write measured power Operation state and power consumption

State	Operatio State Current (mA) DC/DC OFF	DC/DC ON
State 1: wake-up	6	5.4
State 2: pre-processing	7.4	6.9
State 3: pre-receiving	11	10.7
State 4: receiving	17.5	15.4
State 5: Rx changed to TX	7.4	5.8
State 6: transmitting	17.5	15.1
State 7: pre-processing	7.4	6.7

Packaging & Shipping

50sets/ Carton Package Measurements: 25X20X18 cm Gross Weight: 2kg

we will choose the prompt shipping way based on the cost & the delivery time.

Our Services

We provide samples for testing, we do custom beacon & housing.

You could configure the iBeacon by our APP:Aprilbeacon(for IOS&Android4.3)

SDK of IOS and Andriod provided.

We provide any consultation or advice needed.

The iBeacon(s) will be dispatched Monday-Friday, same day as the order is made if purchased before 4pm,tracking number provided.

Once the iBeacon(s) has been purchased documentation will be provided .

FAQ

1 Q: What is the difference between using Apple SDK and April Brother’s SDK ? Is there any additional functionality on your SDK?

A:April Brother's SDK provide some function for configure the April Beacon.

For example:

proximityUUID
major
minor

etc...

Otherwise it's same with Apple SDK.

2 Q: Can I get SDK for Android and iOS?

A: Yes, we can give you SDK for both Android 4.3 and iOS 7.0.

3 Q: Can I have our own logo and in what kind of way?

A: Sure. We can have your logo engraved or printed on your case and also we can put customized sticker on it. Besides, we can customize case based on your requirement if you send us your detailed requirement of your case.

4 Q: Where can I download or air upgrade firmware or device?

A: we will provide you the link for it .

5.Q:Would you also be able to make custom housing for the circuits?

A: Yes, we do custom housing for the circuits as well as the custom iBeacon with logo on the pcb.

6.Q: Do you have any other products that can be used in conjuction with the iBeacon technology?

A: We are developing an sensor with temperature, 3-Axis acceleromete, Lighting. It support iBeacon technology too.

7 Q: Are the products compatible with Andriod apps too?

A: It compatible with Android 4.3 or above. The phone must support Bluetooth 4.0 Smart Ready.

skype: aprilbeacon

workshop pics:

Contact : Penny Chen

Skype:aprbrother