Cactus Micro tiny size duino pro micro compatible board plus WIFI chip esp8266

Features

• Built-in ESP8266 WIFI module (Optional)
• ATmega32U4 running at 3.3V/8MHz
• Supported under Arduino IDE v1.0.6
• On-Board micro-USB connector for programming
• 4 x 10-bit ADC pins
• 12 x Digital I/Os (5 are PWM capable)
• Rx and Tx Hardware Serial Connections

Getting Started

Open Arduino IDE and choose board "LilyPad USB" to start playing with your Cactus Micro in just a few easy steps.

Description

Cactus Micro is our integrated developement board, we have mixed Arduino with WIFI into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.

The micro-controller unit (MCU) is Atmel ATmega32U4 and the WIFI chip is ESP8266.

How It Works

• The ESP8266 chip communicates with Atmega32U4 through the SoftwareSerial or Serial (hardware serial port). It can be switched by a jumper. The default port for communicattion is SoftwareSerial port (RX: 11, TX: 12)
• The pin 13 is connected to pin CH_PD of ESP8266. Put the pin 13 high to enable ESP8266 chip.

Support

All other questions regarding Cactus Micro, please visit our Forum

Technical Details

• About ESP8266 chip
• Serial communication

Cactus Micro Pinout

Package Contains(1set):

•Cactus Micro x 1
•ESP8266 module (ESP-11) x 1
•Pins (Not soldering)  x 1

 For  more product details,pls refer to below link:

/wiki/Cactus_Micro

Min package:2sets/carton 

standard package:25sets/ Carton  Package Measurements: 12X12X5 cm    Gross Weight: 0.5kg 

workshop pics:

 Contact:Penny Chen

 Skype:aprbrother