FC 4 video channel fiber video converter with Rj45
USD $45 - $45 /Set
Min.Order:1 Set
Shenzhen Tianbo Communication Equipment Co., Ltd.
FC port 4V fiber video converter with Rj45
*8 channel video to fiber converter
*2 extra service slots to make functions more flexible
*under strict quality control
This model of video multiplexer is able to realize maximum 8 channel video over fiber. Two extra service slots can make the offered services more flexible.
Applications
Technical Parameters
Video | Video channel: 1~8 video channel |
Connector: BNC | |
Format: PAL/NTSC/SECAM | |
Digitization: 8bits | |
Bandwidth: 6.5MHz | |
Sampling frequency: 13.5MHz | |
Differential gain: 1% (typical) | |
Differential phase: <1°(typical) | |
SNR: 67dB (typical) | |
Audio | Maximum 8 channel bidirectional audio |
Sampling frequency: 25KHz | |
Quantization levels: 16bit | |
ADC(audio input) SNR: 89 dB | |
DAC(audio output) SNR: 92 dB | |
Nominal input and output level: 1.5VP-P | |
RS485/RS422 | Maximum 9 channel RS485 and 8 channel RS422 |
Connector: terminal block | |
Receiver input sensitivity: maximum ±200Mv | |
Receiver output current, IO: ±10Ma | |
The transmitting and receiving maximum rate 200Kbps | |
RS232 | Maximum 4 channel RS422 |
Transmitter output voltage: ±15V | |
Receiver input voltage: ±15V | |
The maximum rate of transmitting and receiving: 200Kbps | |
Ethernet | One Ethernet interface |
Fully comply with IEEE 802.3(2000) protocol | |
Auto adapt 10/100M, full/half duplex | |
Support maximum Ethernet data frame length: 1536 | |
Key | Maximum: 4 channel bidirectional key |
Current of the input end to the ground: less than 10mA | |
Maximum tolerance voltage at output end: DC220V | |
Maximum tolerance current at output end: 2A | |
Action time: less than 4ms | |
Maximum action frequency: 20 times/min | |
Optical | Default: FC, single fiber, single mode, 20km |
Environment | Operating temperature: -20°C ~+70°C |
Storage temperature: -40°C~+80°C | |
Relative humidity: 0~90% non-condensing) |