Specifications

PPGI steel coil
1.Thickness:0.17-0.8mm
2.Width:600-1250mm
3.zinc coat:60-275g/m2
4.Grade:DX51D,SGCC

1.Technical parameters -- PPGI steel coil 

Product	PPGI  steel coil
Steel Grade	Q195,Q345,GR.A, GR.B, SPCC,SPHC, SGCC, DC51D+Z, DX51D+Z, DX51D+AZ,DX52D+Z,G550.ect.
Standard	JIS G 3302-1998, ASTM A653M, GB/T 2518, EN10142, Q/CHG 3-2005, EN 10142, DIN 17162
Raw material	Non-alloyed galvanized(GI) or Al-Si galvanized(GL)
Zinc thickness	60-275g/m2(two-sided uniform thickness)
Coil ID	508 or 610mm
Coil OD	Max 1500mm
Coil weight	4-6 tons
Thickness	0.17-0.8mm
Width	600-1250mm
Length	According to thickness and width per coil
Paint types	ployester(PE),PVDF,Epoxy,SMP,HDP
Paint thickness	Topside: 10microns primer+15 to 25microns. Backside: 5-8microns primer epoxy.
Quailty	Primary quality
Packing	Wrapped by plastic film, waterproof paper, and iron sheet. Or as you request.
Minimum order quantity	25 tons
Delivery time	15-20 days after received deposit or L/C
Payment terms	T/T or L/C at sight( or as your demand)
Supply ability	6,000 ton per month,

duct picture-- PPGI steel coil   / high quality,large quantity !

 

 

 

 

3.Our production line  / advanced production technology and equipment !

4.More PPGI Application:

1) Buildings and constructions: roofing, ceilings, gutters,  venting lines, indoor decorations,window frames, etc.
2) Agricultural equipments: troughs, feeding tools, agricultural driers, irrigation channels, etc.
3) Vehicle parts:  back-seat plates of buses and trucks, conveying systems, oil tanks, etc.