Product Details

Ball Joint

The inner pipe runs through the ball and is welded on either side of the dredge ball joint, therefore protecting the inner surface from corrosion and wear. The heavy lugs on the case securely lock the retaining ring. The wear-resistant case liner protects the inner surface of the case from wear, even when the joint is tilted at its maximum angle. The bayonet ring is a sturdy, stiff ring with a minimum of deflection under pressure. The one-piece moulded gasket ensures a leak-free joint assembly. The locking pin secures the bayonet ring against unwanted rotation.

Parameters:

* 18 Degrees tilting angle

* Easy assembly and dis-assembly

* Low maintenance required

* Replaceable liners made from wear resistant materials

* Quick fix and release of locking

Ser No.	Inner Diameter [mm]	10 bar		20 bar		30 bar
		Welding Type	Flange Type	Welding Type	Flange Type	Welding Type	Flange Type
		Weight[kg]	Weight[kg]	Weight[kg]	Weight[kg]	Weight[kg]	Weight[kg]
DN400	400	260	292	332	368	425	461
DN450	450	356	405	471	536	630	695
DN500	500	485	549	645	718	847	921
DN550	550	601	672	858	930	1130	1,204
DN600	600	799	879	1,119	1199	1,462	1,546
DN650	650	1,189	1315	1,432	1565	1,865	1,997
DN700	700	1,264	1464	1,749	1956	2,132	2,337
DN750	750	1,566	1783	2,258	2484	2,796	3,015
DN800	800	1,847	2093	2,597	2,840	3,114	3,362
DN850	850	2,188	2438	3,108	3,365	3,894	4,153
DN900	900	2,617	2889	3,661	3,936	4,551	4,825
DN1000	1000	3,585	3883	5,043	5,341	6,321	6,617
DN1100	1100	4,753	5086	6,616	6,967	9,185	9,53
DN1200	1200	5,946	6308	8,539	8,924	10,425	10,8