Automatic double ends terminal crimping machine
Introduction:
1.This is a high precision machine
.Adopt motion control high-speed PLC, powerful, stable performance
.7-inch TFT HMI screen , easy to operate
.Using precision stepper motor and drive, stable performance;
. SMC pneumatic components, stable, efficient and durable;
.Japan THK rails, stable and durable;
.Japan's Omron detection assembly, precision, and stability.
2. Multifunctional equipment:
.Can be set through the touch screen corresponding to adjust the parameters as follows: full strip both ends, both ends of the semi-stripping, crimping both ends;
.Set the appropriate parameters through the touch screen,Be adjusted: wire length, strip length, incision depth;
. Modify corresponding parameters can be set via the touch screen:parameters include wire length, strip length;
3.High quality machines
.Wire feeding device adopts stepping drive control, wire length, strip length without deviation;
.Wire feeding device uses synchronous stepper motor to feed lines, stable, accurate, wire no pressure mark;
.Detecting device can detect there is no wire, tie wire detection, bad Crimping testing, air pressure detection;
.Crimping device uses a universal mute terminal machines, low noise, stable performance, can carry the cross, straight to send cards
Parameters:
Wire Size | 0.05 ~ 2.0mm2 (equivalent to UL1571. # 30 ~ # 14) wire cortex maximum outer diameter φ4.0 or less |
Production capacity | Crimping both ends: 4800 pcs/ hour (equivalent UL1571 # 30 ~ # 14, cut length 40mm) |
| Sized cut wire, stripping both ends, both ends of the semi-stripping, crimping both ends, automatically setting the cutting depth and stripping mouth depth |
Wire feed speed | 2500mm/sec(MAX) |
Cutting length | 40~9999mm *The shortest cut length, vary depending on the pressing mold used. |
| Cutting length less 100mm variety 0.5mm+(Set cutting length ×0.002) Cutting length over 100mm variety 1.0mm+(Set cutting length ×0.002) |
| Front-end 1.00~15.00/25.00mm(Half stripping length: 2.00~12.0mm) Back-end:1.00~8.00mm (Half stripping length: 2.00~6.0mm) |
Applicable mold | LEF terminal card mode, direct-mode terminal card |
Crimping Machine | 1.5/2.0/2.5TON Universal Silent Terminal Crimping Machine 2 sets |
Control method | 7-inch TFT HMI screen , easy to operate,motion control high-speed PLC |
Detecting device | detection wire, tie wire detection, bad Crimping testing, air pressure detection;
|
Power supply | single-phase:AC100~120V 50/60Hz 10A |
Compressed air | 0.5 MPa about: 140NL/min |
Operating temperature | 5~25℃ (Ambient temperature) |
Working humidity | 30~80%RH(Non-condensing) |
warranty period | 1 year after delivery (excluding consumable items) |
Mechanical Dimensions | 1000 W×800 D×1450 H (mm) |
Weight | 300kg |
| Roll device, terminal scrap cutting device, actinomycetes devices, wire pulling device |
Our Services
---Purchase guidance
If you are not sure which model is the best option within you budget, please send us the parameter or wire, it’s our pleasure to make a recommendation and comparison models to you.
--- Technical Support
In some cases, professional technical support will be needed , such as parameter meter set-up for difficult-to process wires. HS engineers are here for your assistance.
---After Sale Service
Don’t worry, we are here to help. HS provides life time after sale support to our customers including operation guidance, parts replacement, maintainance support. Just feel free to contact us!
---OEM
HS provides OEM services to our customers.
FAQ:
If u have any question, u can feel free to contact me