Specifications

The application of chemical, petroleum, power plants and environmental industry smoke washing, dust, cooling, spray, etc.

                               Large diameter aiming to halt the race nozzle

Application:

1. high temperature flue gas cooling
2. gas scrubber
3. exhaust dust
4. wet FGD
5. fire fire
6. packing tower spray
7. coke flame
8. washing and bleaching cream
9. chemical tower spray
ld water tower spray

 

Design Features:

        The overall structure, the internal two S-shaped leaves form the largest unimpeded path, and one with the nozzle main body casting. The benefits of using the structure: in the case of the same flow, the SMP nozzle allows the solid particle diameter than the ordinary solid cone nozzle is three times higher. Unique design to maximize avoid blockage of the ordinary nozzle in poor working conditions, especially for spraying large flow of slurry containing particles of impurities, easily conveying the foul liquid of the multi-block material, such as lime slurry . Low pressure to 0.2 bar can be an effective spray. The internal channels are streamlined, so that the liquid through a more fluid, no dead ends, no plug, effectively reducing the pressure of the liquid atomization. Diversion of S-shaped leaves, to avoid the spiral layered spray nozzle, makes the spray more evenly comprehensive internal thread or external thread connection from 3/8 inches to 4 inches, you can choose the flange connection. The material can be used: brass, 303 stainless steel, 316L stainless steel, Teflon (PTFE) and PP. Spray angle: 30 °, 60 °, 90 ° and 120 °. The flow rate from 2.45 L / min to 3400 L / min, and according to user needs 17000L/min