ONLINE UPS 1, 2, 3 KVA
USD $80 - $200 /Set
Min.Order:50 Sets
Shenzhen Santek Power Co., Limited
UPS
Key Features
Product Series | CASTLE | |||
Model | BS1K | BS2K | BS3K | |
Rated Power | VA/W | 1kVA / 0.7kW | 2kVA / 1.4kW | 3kVA / 2.1kW |
Input | Nominal Voltage | 110V/220VAC | ||
Voltage Range | 60V~136V/115 ~ 300VAC | |||
Frequency Range | 46~54Hz(default), user adjustable within 40~60Hz | |||
Power Factor | 0.97 | |||
Connection | IEC320-10A inlet | IEC320-16A inlet | ||
Output | Voltage | 110V/220VAC ± 2% | ||
Frequency | 46~54Hz or 50Hz ± 0.2Hz (Line mode) 50Hz ± 0.2Hz ( Battery mode) | |||
Waveform | Sine Wave | |||
Distortion | 3% | 4% | ||
Overload Capability | 108%~150% for 30 sec., ³150% for 300 ms | |||
Current Crest Ratio | 3:1 | |||
Connections | IEC320 * 4 | IEC320 * 6 | IEC320 * 3 and Terminal Block | |
Battery | Type | Sealed, Maintenance free, Lead-Acid | ||
Quantity | 3 pieces | 8 pieces | ||
Back-up Time (Full load) | 5 min | 9 min | 5 min | |
Recharge Time | 5 hrs to 90% of capacity after full load discharge | |||
Bypass | Automatic Transfer | on overload and UPS failure | ||
Before UPS Power-on | Default NO, user adjustable to YES | |||
Voltage Range | 80~264VAC (Default), user adjustable within 80~286VAC | |||
Transfer Time | 0 ms; less than 4 ms from inverter to bypass and vice versa | |||
LED Indicators | Status | Load level / Battery level, Battery , Utility Power, Inverter, Bypass, Overload, Fault | ||
Audible Alarm | Bypass, On battery mode, Battery low, Overload, Fault | |||
Acoustic Noise | At 1 meter distance | 45 dBA | 50 dBA | |
Communications | DB-9 Port | RS-232 Serial Interface | ||
Intelligent Slot | Options: WebPower, AS400 Card or WinPower CMC | |||
Network Surge Protection | RJ45 I/O port available for network or Fax/Modem | |||
Environmental | Operating Temperature | 0 ~ 40°C | ||
Operating Humidity | 20 ~ 90% non-condensing | |||
Weight | Net (Kg) | 13 | 31.5 | 32 |
Dimensions | W x D x H (mm) | 145 x 400 x 220 | 192 x 460 x 348 |