Name: Single Output Type and DC/AC Inverters Type inverter 1-6KW From Plant
Brand: SANTEK
Availability: InStock

Product Details

Single Output Type and DC/AC Inverters Type inverter 1-6KW From Plant

Product Description

Features:

1.Low battery voltage trip selectable, extracting max power from various batteries with different protections
2.Low quiescent current, selectable sensing cycle to reduce power consumption
3-step intelligent battery charging
4.8 preset battery type selector plus de-sulphation for totally flat batteries
5.PFC(Power Factor Correction) for charger, less power consumption than conventional units
6.Delay before transfer, extra protections for loads under generator mode
7.Input AC voltage range selectable

8.8 ms typical transfer time

9.Ability to select/deselect power saver mode

10.17 alarms/warnings, informative for easier operation and trouble-shooting

Parameter :

Model No.	10001 (2)	20001(2,4)	30001(2,4)	40002 (4)	50002 (4)	60002 (4)
Nominal Power	1000W	2000W	3000W	4000W	5000W	6000W
AC Input
Phase & waveform	Single phase & sinewave
Voltage	120VAC/230VAC
Acceptable Voltage	194-243VAC164-243VAC(wide mode)
Line Low Transfer	85V±4%/184(154 wide mode±4%)
Line Low Return	95V±4%/194(164 wide mode±4%)
Line high Transfer	135V±4%/253±4%
Line high Return	127V±4%/243±4%
Frequency	50Hz or 60Hz (auto sensing)
Line Low Transfer	47Hz for 50Hz,57Hz for 60Hz
Line high Transfer	55Hz for 50Hz,65Hz for 60Hz
Output
Phase & waveform	Single phase & sinewave(bypass mode sync to input)
Voltage	230VAC(bypass mode sync to input)
Voltage Regulation	±10%rms(bypass mode sync to input)
Frequency	50Hz±0.3Hz(bypass mode sync to input)
Crest Power	3 times of ratings
Short Circuit Protection	Yes,shutdown after 10 minutes
Power Factor	0.9-1.0
DC Input
Battery Voltage	12V/24V	12V/24V/48V		24V/48V
Minimum Start Voltage	10V for 12V,20V for 24V,40V for 48V
Low Battery Alarm	10.5V for 12V,21V for 24V,42V for 48V
Low Battery Transfer	10V for 12V,20V for 24V,40V for 48V
High Voltage Alarm	16V for 12V,32V for 24V,64V for 48V
Max Charging Current	70A35A
Over Charge Voltage	15.7V for 12V,31.4V for 24V,62.8V for 48V
Transfer Efficiency
line Mode	>95%
Battery Mode	>88%
power saver	Available when the load is less than 25 Watts
Indicators
7-LED Display	From the right to the left,LED1 line mode (green lighting),LED2 inverter mode
	(green lighting),LED3 charging mode(yellow lighting),LED4 Fully charged
	(green lighting),LED5 over heat shutdown(red lighting),LED6 Overloaded
	shutdown(red lighting),LED7 Saving Mode(green lighting)
3-LED Display	Charging Mode(green lighting),inverter mode(green lighting), Alarm(red lighting)
Switch selector	Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is
	turning the inverter off.
Audible Alarm	Sounding when the heatsink's tem is over 105°C and shutdown after 30 seconds.
Protections	low battery,over charging,over temp,over load
Communications	RS-232/USB(custom-made)
Enviromental
Operating Environment	0-40°C,0-90%RH(non-condensing)
Audible Noise	<60dB
Physical
Net Weight(KG)	18	20	24	35	45	45
Dimension,D X W X H(mm)	218X179X442			218X179X598
*Specifications are subject to change without prior notice.

Product Image

Control Board :

Charging Board: Max Charging Current Up To 70A

Transformer:Copper Material

How does it work?

Applications:

Computer center,network center,communication system,automation control system ect.

Company Information

About the company

CERTIFICATION:

Production ability:10000pcs per month

HKSANTEK Quanlity Policy

Quality is a system, quality is a project,it can contains all the activities of the whole factory,HKSANTEK's belief is "behave

ourseleves firstly, then keep the materials &produce in good level, finally assure the products's quality.everyactivity

effect the quality,so every one is the QC staff in factory.

All the running of HKSANTEK Company is compliant with the ISO9001-2008 and ISO 14001-2004

FAQ

FAQ And Solutions:

1.Does it have CPU control?

Answer:Yes,it has.

2.Does it has communication interface ?which kind of communication interface? What of software is used to control?

Answer:Yes,it has,RS232,WINPOWER sofrware is used to control input and output voltage,frequency,battery voltage and load percentage .

3.Is the output 3 wire+ earth wire ?

Answer:No,the output is 2 wire(null line and live line)+earth line.

4.Is it has resistance of motor?

Answer:Yes,it is,it can load 3 times rated current,and could last 10s.

5.How much is the output current?

Answer:Rated power divide by output voltage.

6.Is the charging current adjustable?

Answer:No,it isn't adjustable.

7. what protection function does the inverter have?

Answer:Low battery,over charging,over temp,over load protection and so on.

8.How many stages for charging?

Answer:Three stages:constant current,constant voltage and floating charge.

9.How long is the transfer time?will it give a alarm when it transfers?

Answer:Less than 10ms,it will not give a alarm when it transfers.

Packaging & Shipping

Packing details

Model	N.G	W.G	Packing size
1KW	18	20	580315305 mm
1.5KW	20	22
2KW	20	22
3KW	24	26
4KW	35	38	755319305 mm
5KW	45	48
6KW	45	48

Delivery time:

Sample Lead time:		5 days
Production lead time:		20days (subject to the actual quantity)

Shipping:

Our Services

Now we are currently searching for new biz partners around the world,we hope to bulid the strong relationships with foreign importers and dealers.We will do our best to strengthen the customer's brands and market growth by our futher cooperation.

We can also provide samples,or have it mage to order, excellent after-sales service and permanent technical support .