100m 1/8" x 3/8" Fiberglass rodding
USD $10 - $13 /Roll
Min.Order:50 Rolls
Sanchuang FRP Products Factory In Shipai Town Dongguan City
Fiberglass rodding is lightweight, extremely strong, non-conductive, its bulk strength-to-weight properties are very good when compared to metals. In a nutshell, solid fiberglass rods are inexpensive, flexible and extremely durable.
To reinforce the stone and marble or griotte.
Advantage:
1) Will not rust over time.
2) Mechanically bonds to the adhesive rather than just surrounding it like metal rodding.
3) The labor and time savings with not having to clean and grind each rod is more than enough to offset the costs of the fiberglass rodding.
4) Fiberglass rodding is one of the strongest materials that can be used to increase load tolerance and deflection up to 1600%.
5) Fiberglass rodding greatly increases safety. If a piece of stone breaks during an install with fiberglass rodding, the stone stays intact. Therefore no employees are injured nor any damages to the floor will need to be repaired.
6) No waste, Comes in 300 foot roll. Quickly and easily cut the exact length you need.
TYPE | NO. | DIMENSION (MM) | WEIGHT (KG/M) | |
FLAT STRIP | W | T | ||
FS-10x1 | 10 | 1 | 0.019 | |
FS-23x1 | 23 | 1 | 0.044 | |
FS-12x2 | 12 | 2 | 0.046 | |
FS-23x2 | 23 | 2 | 0.088 | |
FS-9.5x3 | 9.5 | 3 | 0.054 | |
FS-10x3 | 10 | 3 | 0.057 | |
FS-12x3 | 12 | 3 | 0.069 | |
FS-15x3 | 15 | 3 | 0.086 | |
FS-25x3 | 25 | 3 | 0.143 | |
FS-7x4 | 7 | 4 | 0.053 | |
FS-20x4 | 20 | 4 | 0.153 | |
FS-12x5 | 12 | 5 | 0.114 | |
FS-20x5 | 20 | 5 | 0.191 | |
FS-30x5 | 30 | 5 | 0.286 | |
FS-11x6 | 11 | 6 | 0.126 | |
FS-10x10 | 10 | 10 | 0.191 | |
FS-41x12.5 | 41 | 12.5 | 0.979 | |
FS-76x8 | 76 | 8 | 1.161 | |
FS-150x3 | 150 | 3 | 0.86 |