tire shredder/Tire Recycling Plant/Waste Tire Recycling Line
USD $1 - $300,000 /Set
Min.Order:1 Set
Zhangjiagang Techno Machinery Co., Ltd.
Whole tire shredder/used tire crusher/tire recycling machine ZPS-1200
1 LS1200 TIRE DE-BEADER
2 1200 Whole Tire Cutter of Tire Recycling machine
3 ZPS 1200 WHOLE TIRE SHREDDER
4 XKP RUBBER CRACKER of Tire Recycling machine
5 Pulverizing system of Tire Recycling machine
SupermaticTyre Shredder/ tire recycling machine
Detailed Product Description:
Waste tyre shreddering and recycling machine is mainly used for crushing waste tires into rubber powder for reuse.
The Process flow matched with the above images of Tire Recycling machine:
LS1200tire debeade---1200 tire cutter----Whole tire shredding machine-----xkp rubber cracker---Pulverizing system for rubber power.
Processing method:
1) Physic mechanical crushing method at normal temperature of waste tyre:
no chemical raw material is required,no waste gas,waste water and soot are discharged,
and the cooling water of the equipment is reused,no emission,enviromental protection
2) Take waste tyre as example,the process is as follows:
Main configuration for the complete waste tire recycling system
No.1 LS1200tire debeader
Use:For pulling out the wire loop from the mouth of tire.
Spec:
Adapt tire | <1200mm |
Pull | 5T |
capacity | 20-50 tires /hour |
Motor power | 15KW |
Weight: | 3T |
Dimension | 4200*900*1700 |
No.2 1200 tire cutter
Use:Cutting the Diameter bigger than 1200mm tire into 4 blokcs for shredding
Adapt tire | <=2000mm |
capacity | 20-60 tires/h |
Motor power | 5.5KW |
Dimension | 2080*1000*2130 |
weight | 2.5T |
Adopt to tire | 1200-2000mm |
weight | 2T |
No.3 ZPS1200 whole tire shredder
This device is a special equipment for crushing tyre under ambient temperature into small size(5cm), in order to go to next producing step,
cracking the rubber power(10-30mesh), separating steel wire and fibre.
Technical parameter of zps800 and zps1200 tire shredder of Tire Recycling machine
Model | ZPS-800 | ZPS-1200 |
Production capacity | 1-2 Ton/hour | 3-4T/h |
Size of feeding | ≤800 mm whole tyre | ≤1200 mm whole tyre |
Discharging particles | ≤50*50mm | ≤50*50mm |
Motor powder | 55 kw | 155 kw |
Discharging motor | 2.2 kw | 4 kw |
Cutter rotate speed | 16 r/min | 31 r/min |
Screener rotate speed | 6 r/min | 8 r/min |
Dimension (L*W*H) | 2.8*2.1*2.4 m | 5.2*2.8*3.5 m |
Weight | 6.2 T | 14.8 T |
No.4 XKP-rubbber Cracker
Use of XKP rubbe cracker
1.The mill is mainly used for cracking tyre and some other rubber products, turning the rubber products into granules that the customers' need or any other type products.
2.Being different from the open mixing mill, the roller of the machine has groove, used for crushing the raw rubber before plasticizing.
3. Using vanadium titanium alloy chilled cast iron roller, the surface is hard wear-resisting, after roll for trench roller, internal processing, so that the roll surface temperature uniformity, The machine is equipped with an overload protection device,
protect themain components from being damaged due to overloading
The parameters of xkp rubber cracker
XKP Rubber cracker for Tire Recycling machine | |||
Model | XKP-400 | XKP-450 | XKP-560 |
Diameter of roller(mm) | 400 | 450 | 560 front roller -510rear roller |
Length of roller(mm) | 600 | 650 | 800 |
Liner speed of front roller(m/min) | 18.36 | 24.5 | 25.6 |
Friction ratio of roller | 1:1.27 | 1:1.27 | 1:1.30 |
output(kg) | 200-400 | 400-600 | 2000 |
Motor power(kw) | 37 | 55 | 90 |
L*W*H(mm) | 3320*1900*1850 | 4650×2000×1550 | 4750×2300×2000 |
Weight(kg) | 7000 | 11000 | 18500 |
Use:Mainly used for Grinding the tire or rubber into rubber powder |
4 Fine rubber powder pulverizing system