Specifications

Hydraulic sheet metal Rolling Machine
Three Roller bending machine.
High precision end pre-bending;
CE.ISO

SW11SNC-60X2500 Hydraulic sheet metal Rolling Machine

Mechanical level down 3 roller rolling machine Struct function

The top roller can move horizontally and lift, the top roller lift for changing curvature of plate, horizontal move for symmetry of top roller and two bottom rollers axes line vertical surface, realize technics requirement of plate end bend and other bend, there is no need of pressure machine in manufacture. The machine can finish two end of plate pre-bend and shape and straighten at the same time without return. IT is the NC machine.

 

Feature and advantage:

 

High precision end pre-bending

Setting length of vertical side freely,add press on upper roller for pre-bending,finishing high precision pre-bending.

 

High precision work piece

Upper roller is drum type,bottom rollers balance for cooperating adjustment,continual bend,which is used for sheet and thick plate.

 

Various bend shape

It can roll O,U,R type work piece and stated taper through assistant taper device.O type bend:back bend method;U type bend:front bend method;R bend:Combinations bend method

 

 

Technical parameter:

 

Specification		SW11SNC-60X2500
Max plate Thickness (mm)		60
Max Pre-Bending thickness (mm)		50
Max plate Width (mm)		2500
Upper roller pressure (ton)		610
Min diameter of Max plate Thickness (mm)		2000
Upper Roller Diameter (mm)		650
Bottom roller diameter (mm)		380
Two Bottom rollers center space (mm)		700
Motor power (KW)	Roller rotate	75
	Hydraulic system	30
	Bottom roller move	15
Weight (ton)
Dimension L*W*H (mm)		7200x2900x3800

 

 

Hydraulic Rolling Machine SW11SNC series Technical parameter