Specifications

led strip led controller
1. IR wireless;
2. Working voltage:12V/24V
3. Power: 12V*6A=72W
4.CE&RoHS

led strip led controller

  

      

    

Description:

Professional and high quality driver allows you to remotely control lighting based on LED products such as tapes. It has 44 programs (e.g quickly flashing colors, slow change of colors). It enables wireless change of colors, programs and light intensity. It is also possible to set any color (by mixing the primary colors).

 

Technical Dscription:

Working temperature	-20-60°C
Supply voltage	DC5V, 12V,24V optional
0utput	Three CMOS Open-drain output
Connecting mode	common anode/cathode optional
Certificates	CE&RoHS
Number of programs	44
Remote control type	IR
Voltage Voltage	DC5V/12V/24V
Static power consumption	<1W
Output current	<2A(each channel)
Output power	5V:<30W,  12V:<72W,  24V:<144W

 

More other controllers items information:

 

 

 

 

 

 

Direction for use:

1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power.

2.Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controller and receiver. 

The key press functions are shown in the table as below (in accordance with the key position order)

Brightness rise(a total of eight grading)	Brightness fall(a total of eight grading)	Pause/Run	On/Off
Static red	Static green	Static blue	Static white
Static orange	Static light green	Static dark blue	Static milk white
Static dark yellow	Static cyan	Static lyons blue	Static white pink
Static yellow	Static light blue	Static purple	Static green-white
Static light yellow	Static sky blue	Static brown	Static blue white
Increase red	Increase green	Increase blue	Speed up
Decrease red	Decrease green	Decrease blue	Speed-down
DIY key1	DIY key2	DIY key3	Automatic change
DIY key4	DIY key5	DIY key6	Flash on and off
3 color jumpy change	7 color jumpy change	3 color fade change	7 color fade change

 

 

 

Notes:

1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V. 

2. Before using the infrared remote, the insulating film should removed.

3. Lead wire should be connected correctly according to grade that connecting diagram offers.

4. This product is not to overload;

5. Warranty of this product is two year, but exclude the artificial situation of damaged or overload working