Product Details

rod mill

1.Product introduction

Rod mill is loaded by the cylinder body of grinding medium is named for the steel bar and rod mill is generally adopts wet the overflow type, can be used as a first class open circuit grinding, widely used in artificial sand, grinding mill, chemical plant of the electricity sector level.Rod mill by the motor through reducer and around big gear reduction drive, or directly by the low speed synchronous motor through the surrounding big gear reduction drive, drive cylinder rotary.

2. The product principle
Rod mill by the motor through reducer and around big gear reduction drive, or directly by the low speed synchronous motor through the surrounding big gear reduction drive, drive cylinder rotary.Cylinder body is equipped with the appropriate grinding medium and steel bar.Grinding medium under the action of centrifugal force and friction force, was promoted to a certain height, the fall down or discharge state drops.By grinding materials of feeding mouth straight into the barrel inside, by the movement of grinding medium crushing, and the produc.

3.Advantage
Steel bar can rule movement in the mill.
Easy installation, easy to maintenance.
Quickly to mine.
Product granularity and the crushing phenomenon.

4. The main technical parameters

model	Cylinder size	Cylinder volume	Put the ball quantity	Cylinder speed	power	discharge size	capacity	weight
model	dia*lenght	Cylinder volume	Put the ball quantity	Cylinder speed	power	discharge size	capacity	weight
MB0918	φ900×1800		2.3	29	22	2.5-0.2	6-1.6	6.2
MB0924	φ900×2400		3.1	29	30	2.5-0.2	10-2.9	6.6
MB1224	φ1200×2400		6.5	27	55	2.5-0.2	13-5	13.5
MB1530	φ1500×3000	5.0	8	23	75	2.5-0.2	12-5.5	16.71
MB1830	φ1800×3000	6.5	17	22.8	132	2.5-0.2	20-9.5	29.8
MB2122	φ2100×2200	6.7	18	20.9	160	2.5-0.2	27-12	42.5
MB2130	φ2100×3000	9.2	25	20.9	160	2.5-0.2	30-13	43.9
MB2136	φ2100×3600	11.0	28	20.9	200	2.5-0.2	35-14.8	49.4

Agnes

Tel:+0086 15839292971

Skype:light1569701169