Specifications

Corner Bead, Angle Bead
Material: Stainless steel
To form straight border on edges and corners of wall

Corner Bead, Angle Bead

 

 

Material: Aluminium, PVC, Carbon steel or stainless steel.
Thickness: 0.25-0.50mm
Wing Width: 20mm, 23mm, 25mm, 30mm, 35mm and so on.
Length: No limited
Special shape, sizes and materials can be customized.

 

Corner Bead have a smooth round nose bead with Diamond Mesh wings for the keying of plaster right up to the nose of the bead. On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud. The two flanges sit flat on your raw drywall. The diamond decoration along the length of the flange act as a keyway for holding the drywall mud to the drywall and the corner. This mesh insures a perfect bond and provides effective reinforcement where most needed. Especially recommended in fireproofing columns and beams. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic. 

 

Features:
Metal angle bead, forming a true straight arris that will not easily crack, provides a function to replace timber battens on plastering operations. The expanded metal wings ensure that the bead is securely anchored in the correct depth of plaster on either side of the arris.It protects and reinforces plaster for wall beams & corners where are the most vulnerable to chip crack.

 

Purpose: Widely used in construction. 

Usually the corner bead made by galvanized steel or stainless steel expansion and tensile wings. Corner bead expansion with plaster firmly with wings can be used in building a smooth, flat, concise, and protect the corner to prevent fracturing, bump, corner. Standing length 8’ or 10’, also can be made as customer requirements.