Specifications

Plastic Crate Making machine
A) Energy saving
B) Low noise
C) Low cost
D) Easy operating

Plastic Crate Making machine:

We are a Chinese professional injection molding machine and mould manufacturer.

 

We can produce different injection mould machines for crate.

 

Welome to contact us for professtional solutions.

 

 

 

 

Four types of injection machine: 

A) Standard injection machine

B) Synchronized injection machine: ejecting is synchronized with mould opening, could improve production efficiency by 20%.
C) Energy saving machine: includes injection machine with servo motor, injection machine with variable pump.
D) High speed injection machine: HP Nitrogen assists injection and injection speed could be 2 to 5 times of ordinary type.

 

 

Important features:

A) Clamping Unit:

Five points double toggle mould clamping mechanism is featured with fast opening & clamping, stable & energy saving.

Reliable low pressure protection function greatly prolongs the service life of the mould.

Mechanical & double electric interlock protection devices guarantee the safety of the operators.

 

B) Injection Unit:  

Infection platform is fixed by double axis pin plus flat key so that it is stable.

Double cylinder balance infection molten material mechanism provides high-pressure injection of molten material & safe space.

 

C) Features of hydraulic system:

Perfect combination between computer & high efficient proportional plunger variable pump saves electricity by 25%-50%.

 

D) Controller:

Six stages material injection speeds & pressure, three stages pressure holding speed & pressure, and two stages material molten speed & pressure control can meet all complicated process requirement of products. 

Fuzzy temperature control is used. High & low temperature deviation alarm & thermocouple disconnection inspection functions are available.

 

 

 

 

 

Service:

A) Before sales service:

Our sales and technical team can provide the plastic mould design and relevant parameter suggestions to help them decide the most suitable machine.

 

B) During sales service: 

We help customer to make the workshop display, such as electricity line and cooling water installation and provide free operating training.

 

C) After sales service:  

Our engineers will help customer to install and debug the plastic molding machine. During the 1 year guarantee time, we offer all the damaged parts free of charge.

 

 

 

 

INJECTION UNIT		Unit	LSF-528
			A	B	C	D
	Screw Diameter	Mm	75	80	85	90
	Screw L/D Ratio	L/D	23	21.2	20	18.9
	Short Size	Cm3	1854	2110	2382	2670
	Injection weight	G	1687	1920	2167	2430
	Injection Rate	g/s	426	456	484	514
	Plasticizing capacity	g/s	54.2	59.3	60.3	68.5
	Injection Pressure	Mpa	191	168	149	133
	Screw Speed	Rpm	0-150
CLAMPING UNIT	Clamp Force	KN	5280
	Space Between Tie Bars	mm	810*810
	Toggle Stroke	mm	800
	Max. Mold Height	mm	850
	Min. Mold Height	mm	350
	Ejector Stroke	mm	210
	Ejector Tonnage	KN	158
	Ejector Number	P	17
OTHERS	Max. pump Pressure	Mpa	16
	Pump motor powder	Kw	55
	Heater Power	Kw	27.4
	Machine Dimension(L*W*H)	M	8.1*2.2*2.6
	Machine Weight	T	22