Specifications

Different Bucket Covers Injection Molding Machines
A) Energy saving
B) Low noise
C) Low cost
D) Easy Operating

Different Bucket Covers Injection Molding Machines :

We are a Chinese professional injection molding machine and mould manufacturer.

We can provide you different bucket cover Injection Molding Machines  and auxiliaries. 

Welcome to contact me for professtional turnkey solutions.

 

 

 

 

 

 

 

Advantages:
A)Energy saving: Save 50% to 70% compared to ordinary machine.
B) Easy operating: Parameters settings, system speed adjusting is simple digit function, operate on the control interface like on the ordinary machine.
C) High performance: High response (30ms-130ms), high stability, repetition.
D) Fast response: Energy saving, high precision and lower defectives and waste.
E) Spare parts: Come from Japan, Germany, Italy etc.
F) High precision: Correct the result to 2 decimal places.
G) Visual lubricating system: Protective machinery parts without abrasion and broken.

 

 

 

 

Important features:

A) Clamping Unit:

Five points double toggle mould clamping mechanism is featured with fast opening & clamping, stable & energy saving.

Reliable low pressure protection function greatly prolongs the service life of the mould.

Mechanical & double electric interlock protection devices guarantee the safety of the operators.

 

B) Injection Unit:

Infection platform is fixed by double axis pin plus flat key so that it is stable.

Double cylinder balance infection molten material mechanism provides high-pressure injection of molten material & safe space.

 

C) Features of hydraulic system:

Perfect combination between computer & high efficient proportional plunger variable pump saves electricity by 25%-50%.

 

D) Controller:

Six stages material injection speeds & pressure, three stages pressure holding speed & pressure, and two stages material molten speed & pressure control can meet all complicated process requirement of products.

Fuzzy temperature control is used. High & low temperature deviation alarm & thermocouple disconnection inspection functions are available.

 

INJECTION UNIT		Unit	LSF-308
			A	B	C
	Screw Diameter	Mm	60	65	70
	Screw L/D Ratio	L/D	21.6	20	18.6
	Short Size	Cm3	811	952	1104
	Injection weight	G	738	866	1004
	Injection Rate	g/s	177	206	239
	Plasticizing capacity	g/s	41	49	57
	Injection Pressure	Mpa	193	164	142
	Screw Speed	Rpm	0-185
CLAMPING UNIT	Clamp Force	KN	3080
	Space Between Tie Bars	mm	630*630
	Toggle Stroke	mm	590
	Max. Mold Height	mm	630
	Min. Mold Height	mm	200
	Ejector Stroke	mm	160
	Ejector Tonnage	KN	62
	Ejector Number	P	9
OTHERS	Max. pump Pressure	Mpa	16
	Pump motor powder	Kw	30
	Heater Power	Kw	18
	Machine Dimension(L*W*H)	M	6.15*1.57*2
	Machine Weight	T	10.2

 

 

 

 

 

 

Service:

A) Before sales service:

Our sales and technical team can provide the plastic mould design and relevant parameter suggestions to help them decide the most suitable machine.

 

B) During sales service:

We help customer to make the workshop display, such as electricity line and cooling water installation and provide free operating training.

 

C) After sales service:

Our engineers will help customer to install and debug the plastic molding machine. During the 1 year guarantee time, we offer all the damaged parts free of charge.