Specifications

Injection Moulding Machine for Bottle Perform
A) Energy saving
B) Low noise
C) Low cost
D) Easy Operating

Injection Moulding Machine for Bottle Perform :

We are a Chinese professional injection molding machine and mould manufacturer, providing four types of injection machine with clamping force ranging from 600KN to 32000KN and injection weight from 68g to 40570g. 

 

We can provide you different Injection Molding Machines for PET Perform.

 

Welcome to contact me for professtional solutions.

 

 

 

Advantages:
A)Energy saving: Save 30% to 60% compared to ordinary machine.
B) Easy operating: Parameters settings, system speed adjusting is simple digit function, operate on the control interface like on the ordinary machine.
C) High performance: High response (30ms-130ms), high stability, repetition.
D) Fast response: Energy saving, high precision and lower defectives and waste.
E) Spare parts: Come from Japan, Germany, Italy etc.
F) High precision: Correct the result to 2 decimal places.
G) Visual lubricating system: Protective machinery parts without abrasion and broken.

 

 

 

 

Important features:

A) Clamping Unit:

Five points double toggle mould clamping mechanism is featured with fast opening & clamping, stable & energy saving.

Reliable low pressure protection function greatly prolongs the service life of the mould.

Mechanical & double electric interlock protection devices guarantee the safety of the operators.

 

B) Injection Unit:

Infection platform is fixed by double axis pin plus flat key so that it is stable.

Double cylinder balance infection molten material mechanism provides high-pressure injection of molten material & safe space.

 

C) Features of hydraulic system:

Perfect combination between computer & high efficient proportional plunger variable pump saves electricity by 25%-50%.

 

D) Controller:

Six stages material injection speeds & pressure, three stages pressure holding speed & pressure, and two stages material molten speed & pressure control can meet all complicated process requirement of products.

Fuzzy temperature control is used. High & low temperature deviation alarm & thermocouple disconnection inspection functions are available.

 

INJECTION UNIT		Unit	LSF-308
			A	B	C
	Screw Diameter	Mm	60	65	70
	Screw L/D Ratio	L/D	21.6	20	18.6
	Short Size	Cm3	811	952	1104
	Injection weight	G	738	866	1004
	Injection Rate	g/s	177	206	239
	Plasticizing capacity	g/s	41	49	57
	Injection Pressure	Mpa	193	164	142
	Screw Speed	Rpm	0-185
CLAMPING UNIT	Clamp Force	KN	3080
	Space Between Tie Bars	mm	630*630
	Toggle Stroke	mm	590
	Max. Mold Height	mm	630
	Min. Mold Height	mm	200
	Ejector Stroke	mm	160
	Ejector Tonnage	KN	62
	Ejector Number	P	9
OTHERS	Max. pump Pressure	Mpa	16
	Pump motor powder	Kw	30
	Heater Power	Kw	18
	Machine Dimension(L*W*H)	M	6.15*1.57*2
	Machine Weight	T	10.2

 

 

  

 

 

Service:

A) Before sales service:

Our sales and technical team can provide the plastic mould design and relevant parameter suggestions to help them decide the most suitable machine.

 

B) During sales service:

We help customer to make the workshop display, such as electricity line and cooling water installation and provide free operating training.

 

C) After sales service:

Our engineers will help customer to install and debug the plastic molding machine. During the 1 year guarantee time, we offer all the damaged parts free of charge.