400ton plastic servo injection machine
Plastic injection molding machines we build clamping force from 680 to 8800KN, shot weight from 83 to 4390gr,can meet different sizes and weights of plastic products production requirements.
Technical of LSF398;
INJECTION UNIT | Unit | LSF-398 | |||
A | B | C | |||
Screw Diameter | Mm | 70 | 75 | 80 | |
Screw L/D Ratio | L/D | 21.4 | 20 | 18.8 | |
Short Size | Cm3 | 1385 | 1590 | 1809 | |
Injection weight | G | 1260 | 1447 | 1646 | |
Injection Rate | g/s | 310 | 356 | 405 | |
Plasticizing capacity | g/s | 60 | 65 | 70 | |
Injection Pressure | Mpa | 195 | 158 | 139 | |
Screw Speed | Rpm | 0-165 | |||
CLAMPING UNIT | Clamp Force | KN | 3980 | ||
Space Between Tie Bars | mm | 720*720 | |||
Toggle Stroke | mm | 700 | |||
Max. Mold Height | mm | 760 | |||
Min. Mold Height | mm | 280 | |||
Ejector Stroke | mm | 200 | |||
Ejector Tonnage | KN | 110 | |||
Ejector Number | P | 13 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 37 | |||
Heater Power | Kw | 24.8 | |||
Machine Dimension(L*W*H) | M | 7.3*2.0*2.2 | |||
Oil Tank Capacity | L | 850 | |||
Machine Weight | T | 16 | |||
- Clamping system: Faster response, stable and high rigidity
- Injection system: Accurate and flexible, lower rejection rate
- Control system: Computer and simple operation,molding data memory system
- Power system: Energy saving, high efficient and precise
- Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
- Ceramic heating loop: Uniform heating, better thermal insulation properties so good for production
- Visiable lubrication system: on time clean, avoid cast steel parts abrasion and broken.
- Oil treasure: Filter of hydraulic oil,good for pump and valves
- Long working life: Imported spare parts and updated version
- Aftersales service: Professional & timely