Specifications
Servo system,save electricity by 60% With longer working life ,Ceramic Heater Band for heating system heat preservation is good
INJECTION UNIT |
| Unit | LSF-398 | ||
A | B | C | |||
Screw Diameter | Mm | 70 | 75 | 80 | |
Screw L/D Ratio | L/D | 21.4 | 20 | 18.8 | |
Short Size | Cm3 | 1385 | 1590 | 1809 | |
Injection weight | G | 1260 | 1447 | 1646 | |
Injection Rate | g/s | 310 | 356 | 405 | |
Plasticizing capacity | g/s | 60 | 65 | 70 | |
Injection Pressure | Mpa | 195 | 158 | 139 | |
Screw Speed | Rpm | 0-165 | |||
CLAMPING UNIT | Clamp Force | KN | 3980 | ||
Space Between Tie Bars | mm | 720*720 | |||
Toggle Stroke | mm | 700 | |||
Max. Mold Height | mm | 760 | |||
Min. Mold Height | mm | 280 | |||
Ejector Stroke | mm | 200 | |||
Ejector Tonnage | KN | 110 | |||
Ejector Number | P | 13 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 37 | |||
Heater Power | Kw | 24.8 | |||
Machine Dimension(L*W*H) | M | 7.3*2.0*2.2 | |||
Oil Tank Capacity | L | 850 | |||
Machine Weight | T | 16 | |||
