Water Botte caps injection molding machine
USD $45,000 - $45,000 /Set
Min.Order:1 Set
Changzhou Longsheng Machinery Co., Ltd.
INJECTION UNIT |
| Unit | LSF-308 | ||
A | B | C | |||
Screw Diameter | Mm | 60 | 65 | 70 | |
Screw L/D Ratio | L/D | 21.6 | 20 | 18.6 | |
Short Size | Cm3 | 811 | 952 | 1104 | |
Injection weight | G | 738 | 866 | 1004 | |
Injection Rate | g/s | 177 | 206 | 239 | |
Injection Pressure | Mpa | 193 | 164 | 142 | |
Screw Speed | Rpm | 0-185 | |||
CLAMPING UNIT | Clamp Force | KN | 3080 | ||
Space Between Tie Bars | mm | 630X630 | |||
Toggle Stroke | mm | 590 | |||
Max. Mold Height | mm | 630 | |||
Min. Mold Height | mm | 200 | |||
Ejector Stroke | mm | 160 | |||
Ejector Tonnage | KN | 62 | |||
Ejector Number | P | 9 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 30 | |||
Heater Power | Kw | 18 | |||
Machine Dimension(L*W*H) | M | 6.15X1.57X2 | |||
Machine Weight | T | 640 | |||
Oil Tank Capacity | L | 10.2 |
Advantages; 1)Energy saving; save 30% to 60% compared to ordinary machine. 2)Easy for operating:parameters settings,system speed adjusting is simple digit function, operate on the control interface like on the ordinary machine. 3)High performance; high response(30ms-130ms),high stability,repetition. 4)Fast response; energy saving,high precision and lower defectives and waste. 5)Spare parts:come from Japan, Germany,Italy etc. 6) High precision: Correct the result to 2 decimal places . 7)Visual lubricating system: protective machinery parts without abrase and broken. |