Product Details

Product Description

Features

Electrophoresis: Base on anodized process, an extra transparent film is formed to make the surface clearer and look bit of shining, with very good corrosion resistance.

Products popularly applied in areas such as America, Middle East, Africa and Asia.

Professional data of the product

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Other	Remain
6005	0.6-0.9	0.35	0.1	0.1	0.4-0.6	0.1	0.1	0.15	Aluminum
6060	0.3-0.6	0.1-0.3	0.1	0.1	0.35-0.6	0.05	0.15	0.15	Aluminum
6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.04-0.35	0.25	0.15	Aluminum
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	0.1	0.15	Aluminum

The test report of the quality

Series			Alloy-temper	6063-T5	Category		Basic	Standard	GB5237.1-2008
Chemical composition	Element		Mg(%)	Si(%)	Fe(%)	Cu(%)	Mn(%)	Zn(%)	Ti(%)	Al(%)
	National standard		0.45-0.9	0.2-0.6	≤0.35	≤0.1	≤0.1	≤0.1	≤0.1	Rest
	Check result		0.55	0.43	0.215	0.018	0.0324	<0.01	0.021	Rest
Inspection item				Standard requirement		Check result		Evaluation
Mechanical performance		Tensile strength (Mpa)		≥160		215		Qualified
		Yield strength (Mpa)		≥110		135		Qualified
		Tensile strength (Mpa)		≥8		12		Qualified
		Wechsler hardness (HW)		≥8		10		Qualified

Factory introduction

1. Factory size:Above 300,000 square meters with 44 press production line, from 600ton-4000ton

2. Production capacity:10,000 Ton per month

3. Alloy available:alloy 6063 / 6061 / 6060 / 6005 are available subject to final design

4. Maximum size available:Outside diameter of 400mm

5. Die/Mould ready day:7 to 10 days after down payment & drawings are confirmed.

Ordering process

Samples—→Drawings confirmed—→Die/Mould Making—→Samples and color confirmed—→Mass production

1. Make the drawings within 5 days

2. Make the Die/Mould and tooling in about 2-3 weeks

3. Confirm the new samples and the color

4. Mass production will be finished in about 2-3 weeks subject to quantity and details.

Application

It’s widely used for window, door, furniture, construction, decoration, machine, etc.

CNC precessing ability
Drill holes, stretch bending, milling, welding, fabrication etc.

Typical shapes:

Production Flow

Quality Test

Certificates