Dear customers from eight corners of the world:

Junneng Chemicals welcome you to our home. Junneng Chemicals has become the flagship company and standard-bearer in Chinese paper chemical industry due to its unwavering adherence to state-of-art products and pursuit of advanced technology and consumer-oriented service, now invites you to visit our gold products.

JN PUD-6002 Waterborne Polyurethane Emulsion

v  Introduction

JN PUD-6002, an improvement of JN PUD-6001, is a waterborne anionic polyurethane emulsion, its film is slightly softer than JN PUD-6001, and its activation temperature is slightly higher. JN PUD-6002 is a heat-activated polyurethane resin adhesive, and exhibits outstanding adhesive properties for many synthetic and natural materials, applicable in furniture, automotive, footwear, construction and other industries, possessing all the excellent properties of JN PUD-6001.

v  Specifications

v  Application

The product can be used in laminating or vacuum forming of PVC, ABS, PS, PU board, linen compression molded plate, cotton blankets compression molded plate, non-woven fabric, leather and so on. It can be used in the field of automobile roof, door panels, seats, dashboard etc.

v  Usage

1, Cleaning the surface: the surface to be painted should be cleaned to remove the dust, oil and so on.

2 ,

Spraying: uniformly spray the product on the surface to be coated by using a spray gun. The coating can be dried more quickly by heating. Make sure the bonding temperature is within the range of activation temperature and select the best spray amount and the most suitable adhesive bonding process according to the actual adhesive results .

3, Curing: place the bonded parts in the open air let them cure naturally. These parts can be further processed or packaged 70 hours after bonding. Recommended test time is 7 days after the binding.

4, Storage: tighten the cap lid immediately after use and make sure it is sealed tightly. During storage, small amount of curing and crust may appear in the sealing place which does not affect product performance. After removing them, the product can be used as usual.

v  Caution                           

Avoid freezing, and the optimum storage temperature is between 5 ~ 30 °C. The storage period is 6 months; packaging containers must be tightly sealed and avoid direct exposure to sunlight, otherwise the evaporation of water will make it form a non-redispersible polymer film.

Kind reminder: the information above is based on our current knowledge and experience and we guarantee the quality of the product. Yet due to many factors that influence its function, the product is not necessarily applicable on all conditions. Therefore, users of the product should test it in their own lab before using it formally.

Sales Hotline: 400-881-0300   Http://

The bird's-eye view of our Longnan Production Site

The process of our international businese