Manufacturer Supply Styrene Acrylic Waterproof Emulsion for construction coating JN BA-3435
Negotiable /Ton
Min.Order:1 Ton
Foshan Nanhai Junneng Paper Making Material Factory
Water-based styrene acrylic emulsion for Plastic Paint (coating emulsions) JN BA-3439
Water-based styrene acrylic emulsions for Metallic Paint/ Industry coating emulsion JN BA-3444
Manufacturer Supply UV Coatings (Primer and top coating) for Cabinet Board, Cabinet door
Manufacturer supply Aliphatic aldehyde for leather JN PS-1201
Dear customers from eight corners of the world:
Junneng Chemicals welcome you to our home. Junneng Chemicals has become the flagship company and standard-bearer in Chinese paper chemical industry due to its unwavering adherence to state-of-art products and pursuit of advanced technology and consumer-oriented service, now invites you to visit our gold products.
JN BA-3435 Waterproof Emulsion
(One-component and two-component)
v Features
JN BA-3435 Waterproof Emulsion is a new generation styrene-acrylic polymer emulsion for cement-based waterproof coatings. The product has prominent cement compatibility, high tensile strength, excellent elongation and low water absorption, and all these qualities make waterproof coating cost effective. JN BA-3435 Waterproof Emulsion does not contain APEO (alkyl phenol polyethylene glycol ether) and aqueous ammonia, ensuring better environmental protection.
Advantages:
1, very high elongation and powder/emulsion ratio, saving the recipe cost;
2, excellent compatibility with cement, mixing well with cement, thus reducing the formation of lumps and producing smooth films;
3,low water absorption and low permeability, ensuring the wholeness and excellent waterproof performance under wet conditions;
4, no aqueous ammonia and very slight odor after mixture with cement; no APEO (alkyl phenol polyethylene glycol ether) and environment-friendly.
Typical applications: cement-based waterproof coating; putty(one-component and two-component) and exterior insulation and finish systems (EIFS).
v Specifications
Latex appearance | milky white dispersion |
Solid content | 55.0 ~ 57.0% |
pH | 6.0 ~ 8.0 |
Viscosity (Brookfield viscometer) (3#/ 60 rpm /25°C) | 400 ~ 1,500 cps |
Latex particle size | 0.35 micron |
Specific gravity | about 1.04 |
Minimum film forming temperature | < 0 °C |
Glass transition temperature | - 11 °C |
Tensile strength | 0.4 MPa |
Elongation at Break | > 2400 |
Storage
The product should be stored in a tightly sealed container. Avoid freezing and high temperature. It should be used up within six months. Suggested normal storage temperature should be between 10 - 35 °C.
Kind reminder: the information above is based on our current knowledge and experience and we guarantee the quality of the product. Yet due to many factors that influence its function, the product is not necessarily applicable on all conditions. Therefore, users of the product should test it in their own lab before using it formally.
Sales Hotline: 400-881-0300 Http://
The bird-eye view of our Longnan Production Site
The process of our international business