hard alloy jaw plates made in china , cemented carbide gnathostegite OEM
USD $57 - $59 /Kilogram
Min.Order:1 Kilogram
Zhuzhou Chutian Cemented Carbide Co., Ltd.
hard alloy jaw plates made in china , cemented carbide gnathostegite OEM
products display
material of tungsten carbide introduction
Grade, performance and application of tungsten carbide plate
Grade | Density(g/cm3) | T.R.S(Mpa) | Hardness(HRA) | Performance & application recommended | Equivalent to ISO |
YG6A | 14.9 | ≥1860 | ≥92.0 | Fine grade alloy, with good wear resistance, used for processing blades, wear resistance parts etc. | K10 |
YG8 | 14.8 | ≥2320 | ≥89.5 | High bending strength, wear resistance lower than YG6A, used for processing blades, wear resistance parts etc. | K20 |
YG15 | 14.4 | ≥2500 | ≥87.5 | Used for punch dies, stamping dies and wear resistance parts. | |
YG20 | 14.0 | ≥2600 | ≥85.5 | High bending strength, used for step dies and other stamping dies. |
|
size according to customer's requirement
packing information
workshop show
payment terms
T/T PAYPAL WESTEN UNION ESCROW
factory main products of tungsten carbide
Saw Tips
Buttons for Rock Bits
Inserts for Road Milling, Plaing Bits
Inserts for Coal Cutter Picks
Inserts for Snopw Plow Blades
Inserts for Mining Tools
finished or blank Round Rods (dia from 1.0 to 25.4 mm,length 1.0 to 330mm)
Carbide Tubes
Carbide Rings
Carbide strips and plates
Carbide tips for Debarking Bits
Brazed Inserts or Tips
Carbide pins
Tire studs
Carbide Blanks
Carbide Wear-Parts
carbide circular cutter
alloy welding material,etc.