Product Details

Hydraulic cylinder 3'' bore 8'' stroke like Bailey Cylinder

SPECIFICATION
1. Pin Clip	High tensile zinc-plated steel
2. Pin	High tensile zinc-plated steel
3. Port Plug	Plastic
4. Piston Nut	Lock nut,grade 8, high tensile zinc-plated
5. Tie Rod	ASTM 5140, high tensile, rolled threads for durability
6. Tube	High tensile cold drawn tube, precision honed for extended seal life
7. Rod	High tensile SAE C1045, ground & olished hard chrome plated rod
8. Tie rod nut	Grade 8
9. Female Rod Clevis	Ductile iron ASTM A536 65-45-12
10. Clevis ClampBolt	Grade 8.8
11. Clevis Clamp Nut	Grade 8
12. Gland	Ductile iron ASTM A536 65-45-12
13. Piston	Ductile iron ASTM A536 65-45-12 for excellent life
14. Port Plug(Sealed)	Steel w/Teflon tape
15. Cap	Ductile iron ASTM A536 65-45-12
A. Wiper	Polyurethane
B. Rod seal	Std PolyPak with B lip design (Polyurethane U-cup with nitrile O-ring expander)
C. Tube seal	O-ring
D. Piston ID Seal	O-ring
E. Piston OD seal	Bronze impregnated PTFE piston ring w/rectangular CS nitile expander

NON ASAE

All SALID hydraulic NON ASAE cylinders are designed per ASAE requirements, however are not classified ASAE due to their varying pin to pin dimensions.

A*: 12.50" for 8" stroke ASAE cylinders and 15.50" for 16" stroke ASAE cylinders;

C*: (PORT): NPTF is standard and SAE port is available;

R*(Pin diameter): 1.25" for 16" stroke ASAE cylinder form 3.0" to 5" bore.

ASAE

All SALID hydraulic cylinders (TR, CW, BW)meet ASAE(American Society of Agricultural Engineers) specifications. These specifications establish common mounting i.e.(pin to pin dimensions) and clearance dimensions i.e.(clevis cap/rod clevis throat width and pin diameters) for cylinders and trailing-type agricultural implements. This criteria is only applicable to 8" and 16" stroke cylinders.

ASAE CYLINDER "TR SERIES"

Contact:

Amanda Liang
Tel: +86-532-68009719

fax: +86-532-68009759

Mobile: +86-15953270681

Skype: amandaliangq