Specifications

Hydraulic iron worker, punching machine, steel worker
1.High precision,Wide application
2.EU CE Certification
3.CQC,ISO9001

Ironworker :Ten Function in One Machine, hydraulic shearing, punching, bending, notching machine

Q35Y series hydraulic ironworkers adopt hydraulic driving system. Iron worker can cut punch all kinds of holes. Various metal plates, square bar, angle steel, round iron, flat bar, profiled bars ,channel steel and joist steel can be cutted, punched and notched on the machines.

Detailed function as follow:

1) Robust and accurate steel frame

2) Large punch table with scales

3) Removable bolster for punching flanges and channel and beam

4) 2 independent hydraulic cylinders

5) 2 shielded foot controls

6) 2 Separate Die Openings for oversized punching

7) 5 working stations for wide applications

8) Power inching on all 5 work stations

9) Plate shear support/table and notching table

10) Adjustable stroke controls with indicators on both cylinders

11) Movable work light as standard

12) Overload protection on hydraulic system

13) Electric back gauge

14) 5 pieces punches and dies (punch die, angel steel, square steel, round iron and a series of shearing die)

15) Other punches and dies can be produced as clients’ requirement.

Q35Y Series hydraulic combined punching &shearing machine can cut and punch all kinds of materials such as plate, square bar, angle, round bar, channel and so on. YSD industrial hydraulic ironworkers have been designed and built to the highest quality standards in the industry. This profitable machine will serve any grueling fabrication shop for decades to come. This machine is typically in stock for quick deliveries.

1.Punching

 

Full range of universal punches and dies are available. Unique style allows for large angle iron punching and large channel punching. Large viewing window on stripper swing away design for ease of operation. large two piece gauging table with rulers and stop as standard fittings. Quick change coupling nut and sleeve for rapid replacement of change.

2.Shearing

 

Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down device for round/square bar, channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability to cut angle at 45°both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds. Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily adjustable hold-down device for accurate plate cutting. Large 15″squaring arm with inlaid scale. Special anti-distorted blade for quality cutting. Lower blade has four usable edges. There is screw allow for gap adjust no shim needed.

3.Notching

 

Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and three gauging stops for precise positioning. The notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more. The notching station also has an oversized table with material stops. This section of the machine can also be outfitted with the optional vee notched.

4.Bending

 

Also bend the plate below 500mm. All the components of Machine are of the highest quality in their safety, function, capability and maintenance.

 

TECHANICAL DATA AS FOLLOWS:

 

A Special order for the joist and channel moulds needed.

Specification Model	Unit	Q35Y-16	Q35Y-20	Q35Y-25	Q35Y-30
Pressure	TON	55	75	110	140
Max.cutting tickness	Mm	16	20	25	30
Plate strength	n/mm2	<450	<450	<45	<45
Cutting angle	degree	7	8	8	8
Shearing size of one stroke	mm	16*250,8*400	20*330 ,10*480	25*300 ,16*600	30*355 , 20*600
Ram stroke	mm	80	80	80	80
Number of strokes	cpm	8	8	6	8
Throat thickness	mm	300	355	400	600
Pumching thickness	mm	16	20	25	26
Max.Puching diameter	mm	25	30	35	38
Power of main motor	Km	4	5.5	7.5	11
Profile for cutting
Round Bar	mm	45	50	60	65
Square Bar	mm	40*40	50*50	50*50	55*55
Equal Angle	90°Shearing	125*125*12	140*140*12	160*160*14	180*180*16
	45°Shearing	70*70*8	70*70*10	80*80*7	80*80*10
T-Bar	90°Shearing	120*120*12	140*140*12	160*160*14	180*180*16
	45°Shearing	60*60*8	70*70*10	80*80*10	80*80*10
Joist	mm	126*74*5	160*86*6	200*102*9	280*124*10.5
Channel	mm	126*53*5.5	160*60*6.5	200*75*9	280*86*11.5
dimensions(L*W*H)	Mm	1640*730*1770	1860*800*1900	2355*960*2090	2680*1040*2330
Weight	Kg	1600	2000	4800	6800