Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
Negotiable /Ton
Min.Order:1 Ton
Tangyin Huaxiang Plastic Industry Co., Ltd.
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed LinerUHMWPE Truck Bed Liner Huaxiang
1. Advantage
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
UHMWPE sheets (Ultra high Molecular Weight Polyethylene) is a thermoplastic engineering plastic with the average molecular weight more than 6.0 million. (PE only has the molecular weight between twenty to two hundred thousand.) This kind of material with five top performance of high-wear-resistance, good-chemical resistance, low-temperature resistance, self-lubrication and high-impact resistance, which is regarded as a surprised engineering plastic of excellent comprehensive capacity and competitive price.
1.Abrasive resistance which always have in thermoelectricity polymer.
2.Best shock resistance even in low temperature.
3.Low frictional factor, and well sliding bearing material.
4.Lubricity( no caking, in adhesion) .
5.Best chemical corrosion resistance and stress craze resistance.
6.Excellent machinery process ability .
7.Lowest water absorption(<0.01%) .
8.Paragon electric insulativity and antistatic behavior .
9. Nice high energy radioactive resistance.
10.Density is lower than other thermoplastics (< 1g/m3).
11.Long using temperature range: -269°C--90°C.
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
2.Main characteristics:
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
1. Very high-wear resistance, seven times wear resistance than steel, four times than PTFE
2. Very high anti-impact resistance, two times impact resistance than PC, five times than ABS.
3. Good self-lubrication, the same as PTFE, better than steel and brass appended lubricating oil.
4. Good anti-corrosion resistance, it has very stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity.
5. Very high-inadhesion resistance, the surface of product hardly affixes other material.
6. Very high-impact resistance, ten times impact resistance than PA66, eight times than PTFE.
7. Good low temperature resistance, in liquefied nitrogen (- 196), it still has the prolongation. few other materials can reach to this performance.
8. Non-toxic and clean property, UHMW-PE, which is the material that Food and Drug Administration (FDA) and United States Department of Agriculture (ASDA) permit to apply in food and medicine fields.
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
The main performance comparison
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
High abrasion resistance
Materials | UHMWPE | PTFE | Nylon 6 | Steel A | Polyvinyl fluoride | Purple steel |
Wear Rate | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Good self-lubricating properties,low friction
Materials | UHMWPE -coal | Cast stone-coal | Embroidered plate-coal | Not embroidered plate-coal | Concrete coal |
Wear Rate | 0.15-0.25 | 0.30-0.45 | 0.45-0.58 | 0.30-0.40 | 0.60-0.70 |
High impact strength, good toughness
Materials | UHMWPE | Cast stone | PAE6 | POM | F4 | A3 | 45# |
Impact strength | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700 |
3.Sheet Size Available:
1500*3000mm
1200*4000mm
2200*10000mm
Thickness: 6-200 mm
Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed Liner
4.Technical parameter
Subject | Unit | Paraters |
Tensile strength | Mpa | >30 |
Compression strength | Mpa | ≥41.8 |
Bending strength | Mpa | ≥32 |
Impact strength | KJ/m² | ≥140 |
Ball identation strength | N/mm² | ≥40.8 |
Surface resistivity | Ω | 4.9×10¹³ |
Water absorption | % | 0.0001 |
Heat distortion temperature | °C | 85 °C |
Frication coefficent | % | <0.09 |
Contact us
Truck {Polyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed LinerPolyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed LinerPolyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed LinerPolyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed LinerPolyethlene Plastic Plate Non-stick UHMWPE PE Plastic Trailer Bed LinerPlatePlatePlatePlatePlatePlatePlatePlatePlatePlatePlatePlate