Product Details

screw classifier for mineral, mineral separation crew classifier machines
1.Introduction
2.Application
3.Working principle(basic structure)
4.Features and advantages
5.Technical parameters
6.Spare parts
7.Production line

Introduction

Spiral classifier have four types: high weir single-spiral classifier, high weir double-spiral classifier, immersed type single-spiral classifier and immersed type double-spiral classifier.

Application

This spiral classifier is widely used to combine with the ball grinder in a closed circulation for ore-sand separation in the ore separation plant., classify ore sand and fine silt in the gravity separation plant, classify the granularity from the pulp in the metal ore beneficiation flow and remove the slime and water in the ore washing process.
Working principle

Spiral classifier is mainly composed of transmission system, spiral part, chute, lifting part, upper support and ore discharging valve. It is a type of classifying machine that classifies materials based the principle that the solid particles with different sizes and proportions have different falling speed in the liquid, and fine ore particles float in the water and coarse ore particles sink to the bottom of the chute and the coarse ore particles are pushed by the spiral to the upper part and discharged. This machine is able to filter the powdery particle crushed by the grinding mill and whirl the coarse particles with the spiral to the feeding mouth of the grinding mill and discharge the filtered fine particles.

Features and advantages

1.Simple structure, reliable running and easy operation.
2. It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3. It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4. Its base is made from channel steel, and its body is welded from steel plate.
5. The lower support of spiral bearing is of engine-bearing structure of good wear-resistance and durability.
6. The lifting device is of electric and manual mode.

Technical parameters

Model	Spiral diameter (mm)	Spiral rotation speed (r/min)	Trough length (mm ≤)	Motor power(kw≤)		Dimensions(L×W×H)(mm≤)			Machine weight (t)
Model	Spiral diameter (mm)	Spiral rotation speed (r/min)	Trough length (mm ≤)	For driving	For lifting	Length	Width	Height	≤
FG-3	300	12-30	3000	1.1	--	3850	490	1140	0.7
FG-5	500	8-12.5	4500	1.1	--	5430	680	1480	1.9
FG-7	750	6-10	5500	3	--	6720	980	1820	3.1
FG-10	1000	5-8	6500	5.5	--	7590	1240	2380	4.9
FC-10	1000	5-8	8400	7.5	--	9600	1240	2680	6.2
FG-12	1200	4-6	6500	7.5	2.2	8180	1570	3110	8.5
FC-12			8400	7.5	2.2	10370	1540	3920	11.0
2FG-12			6500	15	4.4	8230	2790	3110	15.8
2FC-12			8400	15	4.4	10370	2790	3920	17.6
FG-15	1500	4-6	8300	7.5	2.2	10410	1880	4080	12.5
FC-15			10500	7.5	2.2	12670	1820	4890	16.8
2FG-15			8300	15	4.4	10410	3390	4080	22.1
2FC-15			10500	15	4.4	12670	3370	4890	30.7
FG-20	2000	3.6-5.5	8400	11-15	3	10790	2530	4490	20.5
FC-20			12900	11-15	3	15610	2530	5340	28.5
2FG-20			8400	22-30	6	11000	4600	4490	35.5
2FC-20			12900	22-30	6	15760	4600	5640	48.7
FG-24	2400	3.67	9130	15	3	11650	2910	4970	26.8
FC-24			14130	18.5	4	16580	2930	7190	41.0
2FG-24			9130	30	6	12710	5430	5690	45.8
2FC-24			14130	37	8	17710	5430	8000	67.9
2FG-30	3000	3.2	12500	40	8	16020	6640	6350	73.0
2FC-30	3000	3.2	14300	---	---	17091	---	8680	84.8

Working Sites

Production line