Durable And High Pressure Stone crusher for two-stage crusher FTM manufacture for sale            

Overview

The Inner Structure:

The Application:

1. Two-stage crusher is suitable for the fine crushing of crisp materials with no blockage, low powder dust pollution and low noise.

2. Two-stage crusher shortens the time that the materials stay in the crushing chamber, thus extending the service life of the easy-wearing parts.

3. The installation is very convenient, thus greatly improving the flexibility of the equipment.

 Working principle

When two-stage crusher works, driven by the two electric motors, the two sets of rotors that are connected together rotate with high speed at the same time, and the materials inside the chamber are crushed first by the higher rotor and then further crushed by the lower rotor rotating with high speed, and the materials inside the inner chamber will also hit and crush with each other until the materials are crushed to powders and become coal cinder particles whose discharging granularity is smaller than 3mm and this granularity can totally satisfy the requirement of brick plant that uses the coal cinder particles as fuel for making brick.

Features and Advantages 

1. This series of crusher continuously crushes materials through two rotors without grating bar device and all kinds of wet slag can be crushed. Even the materials that are just got out from water can be crushed and there will be no blockage. To control the material size, the workers can just adjust the gap between the two crushing hammers. As for the common crushers, since the materials often stay in the crushing chamber and block the it, so that the abrasion of the relevant spare parts will be intensified, but this series of crusher can totally avoid this.

2. Two-stage crusher adopts high alloy wear-resisting hammer, and the hammer and hammer handle can be used together, so that when the hammer is abraded, the workers can just change the hammer without changing the hammer handle.

Packaging and Shipping

Our payment Term:

1. We usually accept T/T, L/C;

2. T/T: 30% in advance as down payment, the balance before delivery;

3. We take pictures of finished products before delivery.

Ways of Packing:

1. Sand blasting, coat with high quality paint;

2. Product wrap by PP-Bubble;

3. Load container, Spear Parts in wooden case.

Transportation:

1. By sea Freight;

2. MSK/MSC/APL/EMC/WANHAI/KLINE;

3. We will remind you before boat arrival.

Company Information

Henan Fote Heavy Machinery Co., Ltd covers an area of 100,000 square meters which includes 60,000 square meters of heavy duty workshops. We have more than 200 sets of large and medium sized metal processing equipments. The Maximum lifting capacity is 300 tons.

Quality Control

Quality is our moral category, our products are worth it's price, products are our moral standing, we firmly believe that we would be punished by the market without good quality.

International Communication

Green industry and internationalization is the strategic thought of Fote. We tries best to integrate the advanced technology, excellent talents and advanced concep into the company development, which will give support to the pace, stragegy and development of Fote's internationalization and make our business partners use the most suitable products.

Our Services

1>Pre-sale services: Enthusiasm

We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.

2>Sale services: Servant

Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

3>After-sale services: Faithfulness

To establish long term friendship, we will regularly pay return visit to customers. Supplying technique, building design, instruction, installation and debugging for free. 

4>We provide one-year warranty to make sure your machine runs consistently. We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.

FAQ

1>How is the quality of your products? 

Our products are manufactured strictly according to national and international standard, and we take a test on every machine before delivery.

2>What guarantee do you provide? 

If products’ quality is not consistent with the description as we described or the promise before you place order, we promise 100% refund.

3>How about price? 

Yes, we are factory and be able to give you the lowest price than market one, and we have a policy that “ for saving time and absolutely honest business attitude,we quote as low as possible for any customer, and discount can be given according to quantity”.