Specifications

Rubber track
1- OEM quality to Kubota, YAMMAR, TOYO, ETC
2- ISO/TS16949 certified
3- Quality guaranteed

 

 

Specification	Width	Pitch	height of internal teeth	width of internal track	teeth available(Z)	Applicaliton	Remark
450 X 90 X Z	450	90	38	36	42,44,46,48,50,51	TOYO5050(46) TOYO6060(51) Lg Series(42,46) KUBOTA(50,53,56)
425 X 90 X 47 (High)	425	90	40	39	47	YANMAR Ag-600(People NO.3)Zhu Jiang
400 X 90 X Z	400	90	35	36	40,42,43,44,45,46,47,48	Hu Zhou NO.1 Stars KUBOTA PRO481(45) PRO488(42) PRO588(43) Tai Hu1450(42) WORLD TOYO3550(40) FENGLING(46) ISEKI(44)	Semi-feeding
400 X 90 X 42 (High)	400	90	40	24	42,46	YANMAR Ce-2 (people NO.2) Zhu Jiang
400 X 90 X Z	400	90	30	26	46,48	Liuling,Sanlian,Foton,World,Jlin Dongfeng.	All Feeding
350 X 90 X 42 (High)	350	90	40	24	42	YANMAR Ce-1 (People NO.1)
350 X 90 X Z	350	90	30	26	40,42,44,46,48	Liulin,Sanlian,Huzhou,Fengling,Xinguang,Yammar,Foton,WORLD,Jinwa	All feeding(130,150,160,180,200)

 

 

 

ATTENTION

1- Check the tension after the track belt installed, it will be failure if too tight or loose. Generally, the sag distance of the center roller is 10 to 15cm to belt when lift the machine.

2- Avoid quickly starting or turning the machine on the scraggly ground.

3- Keep the rubber away from oil and grease, wipe off immediately while it is oil stained.

4- To avoid collision between the rubber track and other components of the machine, especially its inner edge.

5- Don’t using badly worn driving wheel, because it may damage the iron teeth of the rubber track.

6- If the machine is unused for a long time, the rubber track should be removed and cleaned, and kept well indoors to avoid sunlight and wetness.

7- Due to the track belt was made by rubber, the perfect working tempature is between -25 to 55 degree. However, it can meet the needs out of the range if made by special rubber and material.

 

We also can design with special requirements, any inquiry will be much appreciated.