1. Description:

Easy to install, and can be used to protect the data transmission of signal controlling system, such as: computer communication system, CCTV system, access control system, FS system etc.
Avoid the devices from damages of the lightning overvoltage, electostatic discharge,or induced overvoltage.
Design with the signal ground connection terminal block wire to protect the your devices work well

2. Features:

Large discharge current capacity, multi-level protection, swift response speed and small insertion loss.

3. Technical Parameters:
Specification: Single Channel DC 12V Power Surge Protector
Functional Protection: 12V DC Power
Material: Aluminium Alloy
Connector Type: 2Pin
Insert Loss: 0.3dB
Response Time: <0.5ns
Working Temperature: -60 Degree - +190 Degree
Max Discharge Current: 10KA
Dimension: 48*25*25mm
Work Voltage: 12V
Limite Voltage: 18V

4.Installation and maintenance:
In means the input end while out means the output end; the input end is connected with the transmission line while output end is connected with the equipment.
A protection device is connected at the equipment end of signal output source and input end of protected equipment in a serial manner.
The earthing guide wire is connected with the earthing busbar or lightning-proof system reliably.
Special maintenance is not needed for the protection device; please replace immediately in case of damage by high voltage or lightning.

Package: 1PCS x Single Channel DC 12V Power Surge Protector

Notice:If you need an adapter 24V/220V power supply, please go to the link below:1.DC-24V ,2.DC-220V

Product Pic: