1 to 5 Port SATA II Port Multiplier (PM) Raid 0 1 3 5 10 Bracket Mounting Card

1:5 (5x1) Internal SATA II Port Multiplier (PM) Dip Switch RAID Bracket Mounting

Add more data storage and configuring RAID is now an easy-to-do, quick and easy task. External dip switch "Clear and Simple" design makes RAID possible for everyone. Suitable for wide range of storage applications. Supports Windows 8 and Server 2012.

Specification:

With an easy configuration scheme, the device can be a pure port multiplier in a RAID configuration which provides SATA port expansion just like a SATA Hub, or hard-drive performance booster which provides a high performance device seen by host controller or hard-drive data protector which automatically backup data to prevent data loss from hard-drive damage. JMB393 also has advance mode to provide both benefit of performance boost and data protection.

JMB393 is a self-contained storage processor chip which completely frees up the main CPU loading.

External Dip Switch for Easy RAID Configiration

Provides SATA Port Expansion, Data Protection and Performance

Supports 5-port 3.0 Gbps SATA II Interface

Supports SATA II Gen2i and Gen2m

Automatically Speed Negotiation for 3Gbps or 1.5Gbps

Supports Native Command Queue (NCQ)

Supports Hot-plug

Supports PM Aware and Non-PM Aware Host

RAID Feature:

Port Multiplier functional in Clear Mode only to a SATA Port that supports Port

Multiplying.

Fully hardware-accelerated RAID Engine

No driver, BIOS or software required for RAID operation

No external DRAM or processor required for RAID operation

Independent of device SATA port connection sequence

Supports RAID levels: 0 / 1 / 3 / 5 / 10 / LARGE / CLONE

RAID 3 / 5 write-back cache to enhance performance

SATA In-band application interface

Supports more than 2Tera Bytes RAID drive

Supports on-line command based bad sector recovery

Supports on-line Auto-Rebuild

Rebuild speed: 200GB/hour

Rebuild proceed continuously between power cycling

Supports various RAID configuration and monitoring method

Application:

RAID Subsystem

NAS Servers

Backup Systems

Disk Clone Systems

Serial ATA Enclosures

Large Capacity & High Performance Solid State Drive

Very Large Capacity Disk Systems

SATA Ports Expander

**Flashing Green LED means card is operating normally***

Note:

1. No drivers need to be installed.

2. Port Multiplying only supported with CLEAR switch mode with a SATA port that supports Port Multiplying.

3. Supports Windows 8

4. Supports Windows Server 2012

Software Requirement:

Windows Server 2012

Windows 8

Windows 7 (32/64 bit)

Vista

Windows XP

Windows 2000

Windows 2003 (32/64 bit)

Windows 2008 64 bit

Package Included:

1 x 1:5 SATA II Port Multiplier PCI Mounting Card

1 x 4Pin Molex Power Cord

2 x SATA Cables 18"

1 x User's Manual