off cuts from printing factory as raw material produce tissue paper
USD $50,000 - $600,000 /Set
Min.Order:1 Set
Zhengzhou Dingchen Machinery Co., Ltd.
Zhengzhou Dingchen machineryCo.,ltd is engaging in export business on stock preparation equipment and other relative equipment of pulping and paper machines. Welcome to our company, we will provide good service and take you to visit our factory floor.
We will provide reliable quality, superior performance, pre-sales technical support , timely and thoughtful after-sales services .
Pulp consistency | 0.2~0.4% |
Dryness before drying | 35~38% |
Finish paper dryness | 90~92% |
Wrinkle rate :18~25% | 18~25% |
Product moisture | 8~10% |
Production time of one day | 22.5hours |
Felt design tension | 4 KN/m |
Perating tension | 3 KN/m |
Pressure | 2MPa 0.7MPa 0.4MPa three types(the high-pressure water must be filtered by filter screen which not less than 40 mesh) |
PH pulp | PH ±1 |
Temperature T pulp | 0-35°C |
Solid content of clean water | <60g/1000L |
Power
| Motor voltage:380VAC/50Hz three-phase : 220VAC/50Hz single-phase Control voltage : 220VAC/50Hz single-phase :24VDC |
Steam pressure | Maximum : 0.4MPa(saturated steam) |
Compressed air | Requirements filtered ,oil removal ,dewater,dried |
Compressed air pressure | 0.7~0.8MPa |
Working pressure of cylinder | ≤0.6MPa |
Temperature of compressed air | 5~35°C |