Digital Resettable Inductive Hour Meter Counter Meter For Motorcycle,Motocross,ATV,Jet Ski,Marine,Gasoline Engine 2/4 Stroke

Description:

1. Easy Installation no power or ground required

2. Track Services oil,Spark Plug,Ring and Valves

3. Resettable Flash Alert to clean AIR-Filter at 5 hours

4. Resettable Flash Alert to change oil at 10 hours

5. Resettbale Flash Alert toService Valves at 20 hours.

6. Record and display to 99999 hours. Displays total hours when engine is off.

7. Record and Display PAR timer, and the time can be resettable.

8. IP 68 waterproof.

Fuctions:

Service on time,every time! Every 5 hours of operation CLEAN AIR FILTER will flash.

Every 10 hours of running CHANGE OIL will flash.

At 20 hours of operation the meter will flash VALVE SERVICE.

ALL functions count down showing your balance of time before scheduled service.

Functions are re-settable when you hold the button down for 5 seconds.

Meter include total hours accumulated mode that is non-erasable

Installation:

Waring:

Turn engine off, Disconnect spark plug wire from spark plug. De-energize the starting system on engines equipped with meter starters.

1. Choose a location where pick-up wire(included) will reach from the meter to the spark plug.The meter should be installed in a location which is easily viewable and is free of dirt,grease,and oil.

2. Loop pick-up wire into meter though holes(see figure 1).

3. Fasten the meter to mounting surface with tape. If needed ,use two tie wraps

4.Route wrie to spark plug wire and loop around outside of spark plug wire(see figure 2 )

5.Testing meter :Run the engine as normal,on the left side of the meter is an hour glass icon. If this icon is blinking your installation correctly and the HOUR METER is recording running time. If the hour glass icon is not blinking repeat installation instructions above.

Caution:

Keep all wires clear of extremely hot engine parts, such as exhaust area, and keep clear of any rotating parts. Cuts or burns to the wires can cause a short and the hour meter will stop working.

Operation:

1.Each service function(air filter,oil change,service valves) count down it’s time to service as the engine counts hours. If you push the button and scroll through the meter it will show you how much time is left before each service function is due.

2. When you reach a service function the meter will flash the service required “CLEAN AIR FILTER NOW” “CHANGE OIL NOW” “SERVICE VALVES NOW” That service function needs to be performed and will stay flashing.Perform the required service.

3.To clear and reset service,hold down the button while in the flashing service window.

Application:

Hour meter is used for gasoline Engine,Marine,Motorcycle,Snowmobile,ATV,Motocross.etc.

Specification:

Competitive advantage:

1.Waterproof

2.Inductive, No power required

3.Resettable

About us:

Ningbo Jiangbei Run Leader Electronics Co., Limited is a manufacturer of tachometers, hour meters, counters, battery indicators, temperature gauges and so on, with well-equipped testing facilities and strong technical force.

With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in motorcycles, snowmobiles, ATV, tractors, boats, generators and other industries.

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

CE&ROHS: