Production capacity: 5000000 sets.   

More than 9 series of bicycle tyres, accessories and customized wheel,

tens of Engineers for product research.   

Bicycle City/Urbain tyre size: 24X1.5,  26X1.5,  24X1.75,  26X1.75  etc.  

      Other tyre size: 20 X1.95, 24 X1.95, 26 X1.9 5 etc.     

We could supple simple, freight charge collect.    

We could accept mix order.      

We provide high-tech and best finished carbon bike frame, fork, wheelset, rim, handlebar, accessories and other composite products worldwide.     

Mountain bike maintenance skills:  

   In general, as long as the active parts, must frequent maintenance and inspection. But the point is the transmission system, brake system and three-axis (ie, the front and rear axis).

(I) transmission system maintenance: mainly lubrication. The most effective means is to add oil. To remind everyone that the chain should keep its oily sensitive, especially after rain and wading to timely refueling. Before and after the transmission of the moving parts have always oiling.The chain and transmission oil to use bike rust lubricant is the best. Oil can also be ordinary, but less effective. 

(Ii) maintenance of the braking system: the braking system related to the safety of travel, it is particularly important. In addition to holding various activities in parts of the sensitive and reliable, the itinerary should always check clearances and wear brake blocks. Stroke brake blocks on both sides of the gap should be maintained in the range of 2-3 mm. If the gap is too large, it will increase the value of free travel of the brake block so that the sensitivity of the brakes is reduced, if the gap is too small, they might appear to have the brake strength of the phenomenon and increase the intensity of riding, wasting energy. Surface has two or more grooves each brake block, if the grooves to be polished or have been polished, it should be replaced promptly, in order to ensure traffic safety and brake sensitivity.    

1. Q: Can I get some samples?
A: We are honored to offer you free samples for quality check, but it will add extra shipping cost by courier.
2. Q: How does our factory carry out quality control?
A: Our QC always attach great importance to quality control from the very beginning to the end of the production.Each product will be carefully tested before packed.
3. Q: Can I mix different products in one container? 
A: Yes,any products can be matched.
4. Q: What payment do you accept?
A: In general, our payment is 30%T/T deposit and 70%T/T after seeing the copy of B/L,That can be discussed.
5. Q: Can you painting our logo?
A: No problem, any products can printed your logo and brand.  

6. What kind of tests do you do for your products?  UCI? EN? CE?   

A:Our frame testing is according to EN racing bicycle standard requirement.   

    And rim testing is based on EN 14781 standard.   

   Besides, we are proud of some of our clients get our rims and wheels passed by UCI.    

Annual Production Capacity(Last Year)  

Product Name   Bicycle tube  

Production Line Capacity   60,000 PCS / Month 

Actual Units Produced(Previous Year)  

720,000 PCS   

Test:   

Production Line:  

Exhibit Hall:   

ONE-STOP PURCHASING. LOW PRICE AND HIGH QUALITY.TYRE SAMPLES AVAILABLE AND CUSTOMERS CAN VISIT OUR FACTORY DIRECTLY.   

WE PROVIDE HIGH-TECH AND BEST FINISHED CARBON BIKE FRAME, FORK, WHEELSET, RIM, HANDLEBAR, ACCESSORIES AND OTHER COMPOSITE PRODUCTS WORLDWIDE.    

Mary Ma   

Mob:15522678930