low cost 10 bar Water Pressure Sensor
USD $15 - $20 /Piece
Min.Order:10 Pieces
Shanghai Semore Electronic Co., Ltd.
HRW Constant Pressure Water Supply Pressure Sensor is professional for the constant pressure water supply and variable frequency of water supply systems. The welding casing is stainless steel, with good moisture-proof ability and excellent media compatibility.
HRW Constant Pressure Water Supply Pressure Sensor, at the water supply system for using in the inverter, the frequency of anti-interference circuit, to ensure the stability of the output signal. At the same time, a dedicated circuit for the compensation of the sensor offset,sensitivity, precision and non-linear drift,so that it is with the characteristics of high integration,small size,high accuracy,consistency,anti-jamming and fast response.
Application
Technique parameter | |
Measurement pressure(Mpa) | 0.1 0.7 1 1.6 3.5 5 10
|
Overload capacity | 0.2 1.5 2 3.5 7 10 15 |
Casing | stainless steel |
Accurancy | 0.5% 0.2% |
Measurement medium | To 316L stainless steel non-corrosion medium |
Supply voltage | 9-32 VDC |
Signal output | 4-20mA /0-5V |
Load | RA≤(UB-8V)/0.02A |
Dielectric resistance | >10MΩ 500Vdc |
Long-term stability | ±0.25%FSO/year |
Medium temperature | -20~85℃ |
Storage temperature | -20~110℃ |
Compensation temperature scope | -20~80℃ |
Zero spot average temperature coefficient | Typ. ≤±0.2/10k |
Average temperature coefficient of measuring range | Typ. ≤±0.15/10k
|
Response time | ≤1ms CE- uniform anti-jamming |
Wiring protection | Reversed polarity and short circuit protection |
Sealing property | Overmatch IP65 |
Explosion-proof type | ExiaⅡCT6 |
Connection size | M20×1.5 G1/4 NPT1/4(we can customize according to the customer’s requirement) |
Wiring way | DIN/straight(we can customize according to the customer’s requirement) |