Specifications

1.Wide step, stable, with handrail and tool basket
2.Safety and convenience
3.no welding,no rust
4.strong ability of insulat

We are one of the most professional factory specializing in producing and supplying FRP ladders, extension ladders, and Aluminium ladders.We can produce all kinds of ladders depending on your drawings or sample.

Our main FRP ladders are Single side fiberglass ladder, double size fiberglass ladder and FRP extension ladder.

  

Top cap width	325mm
Foot width	522mm
Full assembled ladder closed  length	1575mm
Full assembled ladder closed thickness	145mm
Measurement	0.097m3
Full assembled ladder open high	1438mm
Full assembled ladder open width	914mm
N.W/SET	6.15kg
G.W/SET	7.15kg
load rating	102kg
Qty/20GP(set)	350
Qty/40GP(set)	710
Qty/40HQ(set)	800

 

Proper Use

 

A Stepladder requires level ground support for all four of its side rails. If this worksite condition does not exist, a stepladder should not be selected for the job.

 

A Stepladder must not be used unless its base is spread fully open and the Spreaders locked. Stepladders are not to be used as Single Ladders or in the partially open position.

 

In order to prevent tipping the ladder over sideways due to over-reaching, the user must climb or work with the body near the middle of the steps. The ladder should be set-up close to the work. Never attempt to move the ladder without first descending, relocating the ladder, and then re-climbing. Do not attempt to mount the ladder from the side or step from one ladder to another unless the ladder is secured against sideways motion.

 

In an effort to avoid losing your balance and falling off the stepladder, the user must not step or stand higher than the step indicated on the label marking the highest standing level. The user must also not step or stand on the Top Cap or bucket/pail shelf.

 

When ascending or descending the ladder, always face the ladder and maintain a firm hand hold. Do not attempt to carry other objects in your hand(s) while climbing.

 

The braces on the rear of a stepladder are not intended for climbing or standing and must not be used for that purpose. Note, however, that special stepladders are available with steps on both the front and rear and are intended for two users at the same time.

 

The anti-slip feet at the bottom of the stepladder side rails must be present and in good condition prior to using the ladder. The ladder must not be used on ice, snow or slippery surfaces unless suitable means to prevent slipping is employed.

A stepladder must never be placed upon other objects such as boxes, barrels, scaffolds, or other unstable bases in an effort to obtain additional height.

 

 

All our FRP ladders are made to EN131, which is very popular style in the market. Our ladders has exported to so many countries, such as Canada, America, Brazil, Peru, Britain, Argentina, Ireland, etc.,and very popular there.

More details please contact us