Name: high pressure stainless steel pipe low cost house construction material m30 anchor bolts
Brand: FASTFIX
Availability: InStock

Product Details

high pressure stainless steel pipe low cost house construction material m30 anchor bolts

Product Description

Product Name: Injection Cartridge (Pure epoxy resin)

Product Code: FX-E 280

Product Description: Solvent-free, epoxy based, two part high performance anchoring adhesive.

Uses: For the fixing of non-expanding anchors in the following:

u For structural work:

Rebar / steel reinforcement anchoring in new and refurbishment works.
Threaded rods
Bolts and special fastening systems

u Mechanical and electrical services installation:

Anchoring of supports for ducting and equipment.

u Metal Work, carpentry

Fixing of handrails, balustrades and supports
Fixing of railings
Fixing of window and door frames

For fixing of the following substrates:

Concrete
Hard natural and reconstituted stone
Solid rock
Hollow and solid masonry
Steel
Wood

Product Details:

Application

Drill hole to the diameter and depth required. The diameter must be in accordance with anchor size.

The drill hole must be cleaned with air blower, starting from the bottom of the hole.

The drill hole must be thoroughly cleaned with steel brush. After brush, to use air blower to clean the drill hole again.

Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer. In any case avoid entrapping air. For deep holes extension tubing can be used.

Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole.

During the resin hardening time the anchor must not be moved or loaded.

Technical Data

Gel and loading time:

Application Temperature (°C)	Gel Time (min.)	Loading Time (hr.)
40	14	5
30	28	10
20	60	18
10	240	40

Test Report:

Test Item	Test Method	Test Result
Tensile Strength (kgf/cm2)	ASTM D638-10	311
	(Type I Specimen, 5mm/min)
Flexural Strength (kgf/cm2)	ASTM D790-10	454
Flexural Modulus (kgf/cm2)	Procedure A	29648
Compressive Strength	ASTM D695-10	1158
(kgf/cm2)
Shear Strength (kgf/cm2)	Refer to ASTM D1002-10	76.2

	Grasped loads of adhesive		Working Standard (mm)
	Proof load of client requirements (kgf)	Test result	Hole Diameter	Hole Depth
#3 (Φ10)	3000	Fracture at the threaded section of deformed steel bars	12	90
#4 (Φ13)	5120		16	115
#5 (Φ16)	6570		20	125
#6 (Φ19)	13132		25	160
#8 (Φ22)	17769		27	190
#10 (Φ25)	19190	Concrete Fracture	30	150

**For further information or MSDS/TDS request, please feel free to CONTACT US
.

Packaging & Shipping

Product	Volume	Item Code	Dispenser	Case Q’ty	Pallet Q’ty	CTN Size (cm)
Epoxy acrylate	280ml	FX-V280	FX-GUN 280	20	1400	31 x 21 x27
	360ml	FX-V360	FX-GUN 345	20	1200	35.8 x 25 x 28.5
	380ml	FX-V380	FX-GUN 380	20	1200	36.2 x 31.6 x 26
Pure epoxy	280ml	FX-E280	FX-GUN 280	20	1400	31 x 21 x 27
	360ml	FX-E360	FX-GUN 345s	20	1200	35.8 x 25 x 28.5
	400ml (3:1)	FX-E400 FX-WE400	FX-GUN400	20	1200	36 x 25 x 27.5
	400ml (1:1)	FX-QE400	FX-GUN400L	20	1200	43.3 x 26 x 27
	650ml	FX-QE650	FX-GUN620	10	850	28 x 23 x 30
Polyester	360ml	FX-HP360	FX-GUN 345	20	1200	35.8 x 25 x 28.5
Polyester	380ml	FX-HP380	FX-GUN 380	20	1200	36.2x31.6x26

**If any questions about package, please feel free to CONTACT US.

Shipping:

By sea/ air/ courier. (FOB Kaohsiung)

Courier includes DHL, FedEx, TNT, EMS, etc.