Single wire full automatic chain link fence machine 

 1. Chain link fence machine for manufacturing chain link fence of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the side the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually gided down to enable the next stitch to take place.

2. The chain link is automatically wound to form rolls when the desired length is manufactured.

3. The machine is controlled by PLC automatic controller. So only one person is need to operate it.

4 .One side or both sides of the end of the net hole is twisted or with burr in edge.

5. Use compacting machine to make it into rolls.

1. Width scope of weaving: 1-4m ; suitable for all kinds of Electro-galvanized, hot-dipped galvanized diamond shape mesh.

2.  Mesh scope of weaving: 30-100mm ( According to the requirements of customers can provide 2 different types of knife molds)

3. Wire scope of weaving:1.8-4.0mm

4. The output per minute: for example , if the mesh is 50*50mm, width 2000mm, the output will be 1m2/min

5. The machine is controlled by plc automatic controller

6 .Power consumption: 9KW

7 .Weight of equipment: 4200kg

8 . Outside size: main machine :6700*1430*1800mm      5100*1700*1250mm

9 . Suitable wire to  the machine: high-quality low carbon steel wire ;  galvanized steel wire, stainless steel wire; aluminum alloy wire ; aluminum-clad steel wire

10. Chain link fence is extensively used as fence for play ground and gardens , hihg way ,railway, airport, port, residence, etc.

Two ways of sides: